Showing 106–126 of 133 results
Knipex 87 01 300 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 300mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions : 30
- Capacities for pipes (diameter) - Ø 2 3/4 Inch
- Capacities for nuts - 60 mm
- Capacities for pipes (diameter) - Ø 70 mm
Knipex 14 25 160 | Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated- 160mm
14 25 160
Diagonal Insulation Stripper
Key Features :
- With long cutter
- High cutting capacity due to high leverage joint
- Precision stripping holes for single conductors of 1.5 and 2.5 mm²
- Convenient cutting of NYM cables up to 5 x 2.5 mm²
- Long tips for ultra fine cutting work also in confined areas
- Induction-hardened precision blades, cutting edge hardness approx. 60 HRC
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Knipex 87 05 250 | Cobra® Water Pump Pliers | Multi-Component Handle | Chrome – 250mm
The product which needs no introduction, the Knipex 87 05 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
- Technical attributes
Adjustments - 25
Capacity For Nuts - 46mm
Capacity For Pipes - 50mm Diameter
Knipex 74 06 180 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.7 mm
- Cutting capacities piano wire (diameter) - Ø 2.2 mm
- VDE tested - yes
Knipex 13 42 165 | Cutting, Stripping & Dismantling Pliers | Multi-Component Handle | Black Atramentized – 165mm
13 42 165 Stripping Pliers
Multifunctional - cutting and stripping with one pair of pliers. for time-saving stripping of all round sheathed and damp-proof installation cables (e.g. NYM cable). simplified access especially into deep mounted junction boxes thanks to slim head design and optimally angled cable sheath cutter. strip cables easily and without damage thanks to circular cutting edge with depth limiter. Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm². With side cutters for cutting and trimming conductors, wires, small screws and nails. All cutters additionally induction-hardened to approx. 61 HRC for high wear resistance. 30 % lighter than comparable pliers.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Cable stripping values (diameter): 8-13 mm
- Stripping capacities in square millimetres: 0.75-1.5 mm²?/ 2.5 mm²
Knipex 87 02 300 | Cobra® Water Pump Pliers | Multi-Component Handle | Grey Atramentized – 300mm
87 02 300 KNIPEX Cobra®
Push the button for adjustment on the workpiece. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Box-joint design for high stability due to double guide. Reliable catching of the hinge bolt: no unintentional shifting. Pinch guard prevents operators' fingers being pinched.
- Adjustment positions: 30
- Capacities for nuts: Ø 2 3/4
- Capacities for nuts: 60 mm
- Capacities for pipes (diameter): Ø 70 mm
14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes
Length : 175 mm
Width : 60 mm
Height : 30 mm
Weight : 216 g
Knipex 14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes:
- Length: 175 mm
- Width : 60 mm
- Height: 30 mm
- Weight: 216 g
Knipex 73 06 160 | X-Cut® VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
73 06 160 KNIPEX X-Cut®
cuts finest strands as well as multi-core cables and piano wires. Powerful, light and universal. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Box-joint design: highest stability with low weight. Doubly supported joint axis for heavy duty. Large opening width for thicker cables. Cuts precisely, even through fine copper wires. Compact, low-weight construction. Universally usable, in the assembly, maintenance and production. 40% less force required compared with standard diagonal cutters of the same length.
- Cutting capacities soft wire (diameter): Ø 4.8 mm
- Cutting capacities medium hard wire (diameter): Ø 3.8 mm
- Cutting capacities hard wire (diameter): Ø 2.7 mm
- Cutting capacities piano wire (diameter): Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded: Ø 12.0 mm
- VDE tested: yes
Technical attributes:
Length : 165 mm
Width : 60 mm
Height : 28 mm
Weight : 175 g
Knipex 72 21 160 | Diagonal Cutter For Plastics | Cutting Edges 90° | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 72 21 160 Diagonal Cutter For Plastics
Due to their cutting faces at an angle of 90°, the Knipex 72 21 160 diagonal cutters are suitable for work perpendicular to the component. This approach is necessary when access from the side is not possible, as with angled plastic mould parts or machine components.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 86 03 125 | Mini Pliers Wrench – Dual Use Tool | Coated Handle | Chrome Plated – 125mm
86 03 125 Mini pliers wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. the mini pliers wrench for precision mechanics. particularly suitable for working on small bolted connections. very good access in very confined areas.
- Jaw thickness (joint) (B2): 5.0 mm
- Joint thickness (B3): 9.5 mm
- Tips thickness (B1): 3.0 mm
- Adjustment positions: 11
- Capacities for nuts: Ø 078
- Capacities for nuts: 23 mm
Technical attributes:
Length : 125 mm
Width : 35 mm
Height : 13 mm
Weight : 105 g
Knipex 95 16 165 | VDE Cable Shears | Multi-Component Handle – 165mm
95 16 165 Cable Shears
For cutting copper and aluminium single conductors as well as multiple stranded cables. Clean and smooth cut without crushing and deformation. Not suitable for steel wire and hard drawn copper conductors. Precision-ground, hardened blades. Easy cutting with one-hand operation. With guard. Adjustable bolted joint, self-retaining screw.
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- AWG: 1 / 0
- VDE tested: yes
Technical attributes
Length : 180 mm
Width : 47 mm
Height : 21 mm
Weight : 262 g
Knipex 13 82 200 | Electrical Installation Pliers | Multi-Component Handle | Black Atramentized – 200mm
13 82 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers.
Technical Atributes:
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
- Capacity in square millimetres: 0.5-2.5 mm²
- AWG: 1 / 0
- Length : 255 mm
- Width : 85 mm
- Height : 20 mm
- Weight : 280 g
Knipex 86 01 180 | Pliers Wrench – Dual Use Tool | Coated Handle | Black Atramentized – 180mm
86 01 180 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Increased gripping capacity thanks to two additional setting positions: variable gripping of all widths across flats up to 40 mm. 10 % less weight with the same stability. Practical adjustment scale: a laser-cut scale allows the wrench opening to be set before gripping. with narrow gripping jaws - for tightening situations that require a slim tool.
- Jaw thickness (joint) (B2): 8.0 mm
- Joint thickness (B3): 12.0 mm
- Tips thickness (B1): 5.0 mm
- Adjustment positions: 15
- Capacities for nuts: Ø 112
- Capacities for nuts: 40 mm
Technical attributes:
Length : 183mm
Width : 46mm
Height : 15mm
Weight : 230 g
Handles : Plastic coated
Head : Polished
Adjustment Positions : 15
Knipex 86 03 150 | Mini Pliers Wrench – Dual Use Tool | Coated Handle | Chrome Plated – 150mm
86 03 150 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Push the button for adjustment on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. ideal multi-purpose wrench in pocket size. indispensable companion in emergency tool kit.
- Jaw thickness (joint) (B2): 7.0 mm
- Joint thickness (B3): 10.5 mm
- Tips thickness (B1): 4.7 mm
- Adjustment positions: 14
- Capacities for nuts: Ø 1
- Capacities for nuts: 27 mm
Technical attributes :
Length : 165 mm
Width : 50 mm
Height : 25 mm
Weight : 175 g
Knipex 86 01 250 | Pliers Wrench – Dual Use Tool | Coated Handle | Black Atramentized – 250mm
86 01 250 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Adjustable tightening tool. Also excellent for gripping, holding, pressing and bending workpieces. Push the button for adjustment on the workpiece. Zero backlash jaw pressure prevents damage to edges of sensitive components. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. with scaling for presetting the width apart from the workpiece.
- Jaw thickness (joint) (B2): 8.0 mm
- Joint thickness (B3): 14.0 mm
- Tips thickness (B1): 8.0 mm
- Adjustment positions: 19
- Capacities for nuts: Ø 2
- Capacities for nuts: 52 mm
Technical attributes:
Length : 263mm
Width : 52mm
Height : 17mm
Weight : 465g
Handles : non slip coating
Head : polished
Adjustment positons : 19
Knipex 85 51 250 A | Spring Hose Clamp Pliers | Non-Slip Handle | Grey Atramentized – 250mm
85 51 250 A Spring Hose Clamp Pliers
Rotating, universal grip inserts for reliably gripping the clamps in all positions. Jaw inserts can also be rotated under load. Extremely good leverage which allows clamps to be opened easily without great effort. Slim head design; narrow head width, rotating grip inserts make this an ideal tool, especially in confined areas. Additional function: detach hoses gently using the serrated jaw. quick-set adjustment: adjusts by shifting directly onto the workpiece. can be used for standard, space-saving, spring wire hose clamps and for spring band clamps up to 70 mm nominal size. allows more than 40 mm clamping range.
- Capacity: Ø max. 70 mm
- Adjustment positions: 25
Technical attributes
- Length : 252mm
- Width : 50mm
- Height : 20mm
- Weight : 345g
- Surface : Grey Atramentized
- Handles : With non slip plastic coating
-Adjustment Positions : 25
Knipex 13 92 200 | Electrical Installation Pliers w/ Locking Lever | Multi-Component Handle | Black Atramentized – 200mm
13 92 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers. in case of models with opening spring integrated in the joint, the activated locking lever keeps the cutting edges closed while other functions remain active. the intelligent latching mechanism enables you to "grip" without opening the pliers. The cutting edge remains closed and protected.
Cutting capacity copper cable, multiple-stranded: Ø 15 mm
Cutting capacity copper cable, multiple-stranded: 50 mm²
Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
Capacity in square millimetres: 0.5-2.5 mm²
AWG: 1 / 0
Technical attributes:
- Length:210 mm
- Width :63 mm
- Height:21 mm
- Weight:260 g