You must be logged in to post a review.
14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
40.00 JD
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
– Cutting capacities soft wire (diameter): Ø 2.5 mm
– Cutting capacities medium hard wire (diameter): Ø 1.5 mm
– Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
– AWG: 16?/ 14
– VDE tested: yes
Technical attributes
Length : 175 mm
Width : 60 mm
Height : 30 mm
Weight : 216 g
| Weight | 0.216 kg |
|---|
Reviews (0)
Related products
Knipex 76 05 125 | Diagonal Cutter For Electromechanics | With Comfort Handle | Chrome Plated – 125mm
76 05 125 - Diagonal Cutter For electromechanics
- With sharp, precisely aligned cutting edges
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 63 HRC
- Lap joint
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical attributes:
- Cutting capacities medium hard wire (diameter) - Ø 2.3 mm
- Cutting capacities hard wire (diameter) - Ø 1.5 mm
- Cutting capacities piano wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 03 mm
- Jaw length (B) - 16 mm
- Jaw thickness (joint) (D) - 9 mm
- Head width (A) - 14.5 mm
Knipex 13 82 200 | Electrical Installation Pliers | Multi-Component Handle | Black Atramentized – 200mm
13 82 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers.
Technical Atributes:
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
- Capacity in square millimetres: 0.5-2.5 mm²
- AWG: 1 / 0
- Length : 255 mm
- Width : 85 mm
- Height : 20 mm
- Weight : 280 g
Knipex 87 01 180 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 180mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
- Pliers: Grey Atramentized
- Head: Polished
- Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 18
- Capacities for pipes (diameter) - Ø 1 1/2 Inch
- Capacities for nuts - 36 mm
- Capacities for pipes (diameter) - Ø 42 mm
Reviews
There are no reviews yet.