























Knipex 08 26 145 | VDE Needle-Nose Combination Pliers | Multi-Component Handle | Chrome Plated – 145mm
26.00 JD
The Knipex 08 26 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
– Handy for confined areas due to slim head design and pointed jaws.
– Groove in gripping area for pulling small nails, pins and bolts.
– Cutting edges for soft and hard wire.
– Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
– Pliers: Chrome Plated
– Head: Chrome Plated
– Handles: Multi-Component
Weight | 0.145 kg |
---|
Related products
Knipex 38 31 200 | Curved Mechanics Pliers | Coated Handle | Black Atramentized – 200mm
27.00 JD
38 31 200 Mechanics' Pliers
High bending strength of the pliers tips. cranked, half-round jaws.
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
Technical attributes :
Length : 200 mm
Width : 51 mm
Height : 13 mm
Weight : 176 g
Knipex 72 02 125 | Diagonal Cutting Plier For Plastic | Multi-Component Handle | Polished – 125mm
24.00 JD
72 02 125Diagonal Cutters for plastics
The Knipex 72 02 125 are the smallest Knipex diagonal cutters for plastic. They are used when moulded parts need to be mechanically separated from sprue after demoulding. They are also suitable for delicate work, e.g. in model making. Their surface ground cutting faces produce a clean, flush separation of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component.
Key Features :
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 26 22 200 | Snipe Nose Side-Cutting (Stork Beak) Bent Pliers | Multi-Component Handle | Black Atramentized – 200mm
26.00 JD
26 22 200 Snipe Nose Side Cutting Pliers
Elastic tips: dimensionally stable even when twisted. Distortion-tolerant, elastic precision tips. Half-round, long, tapered jaws. With cutting edges for soft, medium-hard and hard wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC. 40° angled jaws.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Gripping surface length (L4): 23.0 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 18 mm
Technical attributes
- Length : 205 mm
- Width : 53 mm
- Height : 19 mm
- Weight : 197 g
- Handles : With multi component grips
- Head : Polished
- Beve : Cutting edges with bevel