You must be logged in to post a review.
Knipex 70 06 140 | VDE Diagonal Cutter | Multi-Component Handle | Chrome Plated – 140mm
26.00 JD
The Knipex 70 06 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
– Designed for all-round use.
– High quality material and precise workmanship for long service life.
– Narrow head style for use in confined areas.
– Precision cutting edges for soft and hard wire.
– Clean cutting of thin copper wire.
– Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
– Pliers: Chrome Plated
– Head: Chrome Plated
– Handles: Multi-Component
Technical Attributes:
– Cutting capacities medium hard wire (diameter) – Ø 2.5 mm
– Cutting capacities hard wire (diameter) – Ø 1.8 mm
– VDE tested – yes
| Weight | 0.160 kg |
|---|
Reviews (0)
Related products
Knipex 77 02 115 | Electronics Diagonal Cutter With Box Joint | Multi-Component Handle | Mirror Polished – 115mm
77 02 115 Electronics Diagonal Cutter
With box joint
- Durable, load-optimised design with backlash-free box joint
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- Less physical effort due to very high transmission ratio
- Load-optimised for a more direct feel when working
- Low-friction double spring for smooth and even opening
- The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 62 HRC
- Round head, with small bevel
Technical attributes :
- Cutting capacities medium hard wire (diameter) - Ø 1.2 mm
- Cutting capacities hard wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 01 mm
- Jaw length (B) - 14 mm
- Jaw thickness (joint) (D) - 7.5 mm
- Head width (A) - 11 mm
Knipex 78 61 125 | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel – 125mm
78 61 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. also suitable for cutting glass fibre cables (fibre optics). cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Special tool steel, oil hardened in multiple stages.
- Cutting capacities medium hard wire (diameter): Ø 1.2 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 73 72 180 F | Twin Force High Performance Diagonal Cutters With Opening Spring | Multi-Component Handle | Black Atramentized – 180mm
73 72 180 F
KNIPEX TwinForce® High Performance Diagonal Cutters With opening spring
- The superior High-Leverage Diagonal Cutter with patented double joint
- Ideal transmission of force due to double-hinged design
- Reliably cuts all types of wire, including steel tape
- For rough or very fine cutting
- Low cutting impact: gentle on hands. The tension on muscles and tendons is relieved
- For comfortable cutting, repetitive cutting or extremely hard cutting jobs
- High degree of stability and zero-backlash due to precisely milled forged-in axles
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- With opening spring to simplify reapplication and for repetitive cutting
Technical attributes :
- Cutting capacities soft wire (diameter) - Ø 5 mm
- Cutting capacities medium hard wire (diameter) - Ø 4.6 mm
- Cutting capacities hard wire (diameter) - Ø 3.2 mm
- Cutting capacities piano wire (diameter) - Ø 3.0 mm
Reviews
There are no reviews yet.