You must be logged in to post a review.
View cart “Diagonal Cutter/Insulated 6 inch” has been added to your cart.






Knipex 29 11 160 | Telephone Pliers | Plastic Coated Handle | Black Atramentized – 160mm
22.00 JD
29 11 160 | Telephone Pliers
Extra slim tips
Knurled gripping surfaces
Technical Attribute:
– Jaw thickness (joint) (T1) – 8.0 mm
– Tips width (W4) – 2.5 mm
– Tips thickness (T2) – 8.5 mm
– Jaw length (L3) – 55.0 mm
– Head width (W3) – 14.0 mm
Weight | 0.103 kg |
---|
Reviews (0)
Related products
Knipex 41 04 250 | Locking Grip Pliers | Semi-Circular Gripping Mouth – 250mm
21.00 JD
41 04 250 Grip Pliers
Hold round, profile and flat material securely. Heavy duty model. With adjustment screw and release lever. One-hand operation. High clamping pressure due to toggle lever action.
- Clamping width round: 40 mm
- Clamping width square: 20 mm
- Clamping width hexagon: 30 mm
Technical attributes
Length : 230 mm
Width : 65 mm
Height : 17 mm
Weight : 517 g
Knipex 32 11 135 | Relay Adjusting Pliers | Coated Handle – 135mm
21.00 JD
32 11 135 Relay Adjusting Pliers
- For gripping components and wires of the smallest diameters and for bending contact and relay springs
- Polished gripping surfaces
- Edges carefully deburred
Technical attributes :
- Jaw thickness (joint) (D) - 7.0 mm
- Tips width (E) - 1.0 mm
- Tips thickness (F) - 2.0 mm
- Jaw length (B) - 34.0 mm
- Head width (A) - 12.5 mm
Knipex 78 61 125 | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel – 125mm
20.00 JD
78 61 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. also suitable for cutting glass fibre cables (fibre optics). cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Special tool steel, oil hardened in multiple stages.
- Cutting capacities medium hard wire (diameter): Ø 1.2 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Reviews
There are no reviews yet.