Showing 22–42 of 94 results
Knipex 08 22 145 | Needle-Nose Combination Pliers | Multi-Component Handle | Black Atramentized – 145mm
The Knipex 08 22 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
- Handy for confined areas due to slim head design and pointed jaws.
- Groove in gripping area for pulling small nails, pins and bolts.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 29 11 160 | Telephone Pliers | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 87 01 150 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 150mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 16
- Capacities for pipes (diameter) - Ø 1 3/8 Inch
- Capacities for nuts - 32 mm
- Capacities for pipes (diameter) - Ø 36 mm
Knipex 70 05 160 | Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 70 05 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
Knipex 70 02 180 | Diagonal Cutter | Multi-Component Handle | Black Atramentized – 180mm
The Knipex 70 02 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
Knipex 03 06 180 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.4 mm
- Cutting capacities hard wire (diameter) - Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded - Ø 12.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 72 02 125 | Diagonal Cutting Plier For Plastic | Multi-Component Handle | Polished – 125mm
72 02 125Diagonal Cutters for plastics
The Knipex 72 02 125 are the smallest Knipex diagonal cutters for plastic. They are used when moulded parts need to be mechanically separated from sprue after demoulding. They are also suitable for delicate work, e.g. in model making. Their surface ground cutting faces produce a clean, flush separation of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component.
Key Features :
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 08 05 110 | Mini Combination Pliers | Multi-Component Handle | Chrome Plated – 110mm
Knipex 08 05 Series Mini Combination Pliers
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Specification:
- Cutting Capacity (Medium/Hard Wire): 2.5mm Ø Dia
- Cutting Capacity (Hard Wire): 1.6mm Ø Dia
- Cutting Capacity (Multi-Strand Copper Cable): 9mm Ø Dia or 10.0mm²
Knipex 38 21 200 | Bent Mechanics Needle Nose Pliers | Coated Handle | Black Atramentized – 200mm
38 21 200 Mechanics' Pliers
High bending strength of the pliers tips. 40° bent, half-round jaws.
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
- Head angle: 40
Technical attributes :
Length : 200 mm
Width : 47 mm
Height : 13 mm
Weight : 175 g
Knipex 31 11 160 | Flat Needle- Nose Pliers – 160mm
31 11 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes:
Jaw thickness (joint) (T1) - 7.5 mm
Tips width (W4) - 1.8 mm
Tips thickness (T2) - 2.5 mm
Jaw length (L3) - 55.0 mm
Head width (W3) - 16.0 mm
Knipex 29 25 160 | Telephone Long Nose Pliers | Multi-Component Handle | Chrome Plated – 160mm
29 25 160 Telephone Pliers
- Extra slim, fine tips
- Also suitable for soldering work
- Gripping surfaces cross-hatched
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical Attributes:
- Jaw thickness (joint) (T1) - 9.0 mm
- Tips width (W4) - 2.0 mm
- Tips thickness (T2) - 2.0 mm
- Jaw length (L3) - 54.0 mm
- Head width (W3) - 14.0 mm
Knipex 08 26 145 | VDE Needle-Nose Combination Pliers | Multi-Component Handle | Chrome Plated – 145mm
The Knipex 08 26 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
- Handy for confined areas due to slim head design and pointed jaws.
- Groove in gripping area for pulling small nails, pins and bolts.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Knipex 87 01 180 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 180mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
- Pliers: Grey Atramentized
- Head: Polished
- Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 18
- Capacities for pipes (diameter) - Ø 1 1/2 Inch
- Capacities for nuts - 36 mm
- Capacities for pipes (diameter) - Ø 42 mm
Knipex 87 02 180 | Cobra® Water Pump Pliers | Multi-Component Handle | Grey Atramentized – 180mm
87 02 180 KNIPEX Cobra®
Push the button for adjustment on the workpiece. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Box-joint design for high stability due to double guide. Reliable catching of the hinge bolt: no unintentional shifting. Pinch guard prevents operators' fingers being pinched.
- Adjustment positions: 18
- Capacities for nuts: Ø 1 1/2
- Capacities for nuts: 36 mm
- Capacities for pipes (diameter): Ø 42 mm
Technical attributes
Length : 185 mm
Width : 55 mm
Height : 18 mm
Weight : 196 g
Knipex 70 06 140 | VDE Diagonal Cutter | Multi-Component Handle | Chrome Plated – 140mm
The Knipex 70 06 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 2.5 mm
- Cutting capacities hard wire (diameter) - Ø 1.8 mm
- VDE tested - yes
Knipex 03 06 200 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 200mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting capacity copper cable, multiple-stranded - Ø 13.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 26 22 200 | Snipe Nose Side-Cutting (Stork Beak) Bent Pliers | Multi-Component Handle | Black Atramentized – 200mm
26 22 200 Snipe Nose Side Cutting Pliers
Elastic tips: dimensionally stable even when twisted. Distortion-tolerant, elastic precision tips. Half-round, long, tapered jaws. With cutting edges for soft, medium-hard and hard wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC. 40° angled jaws.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Gripping surface length (L4): 23.0 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 18 mm
Technical attributes
- Length : 205 mm
- Width : 53 mm
- Height : 19 mm
- Weight : 197 g
- Handles : With multi component grips
- Head : Polished
- Beve : Cutting edges with bevel
Knipex 76 05 125 | Diagonal Cutter For Electromechanics | With Comfort Handle | Chrome Plated – 125mm
76 05 125 - Diagonal Cutter For electromechanics
- With sharp, precisely aligned cutting edges
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 63 HRC
- Lap joint
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical attributes:
- Cutting capacities medium hard wire (diameter) - Ø 2.3 mm
- Cutting capacities hard wire (diameter) - Ø 1.5 mm
- Cutting capacities piano wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 03 mm
- Jaw length (B) - 16 mm
- Jaw thickness (joint) (D) - 9 mm
- Head width (A) - 14.5 mm
Knipex 87 51 250 | Cobra® Extra-Slim Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 250mm
87 51 250 KNIPEX Cobra® ES
Ideal for service, maintenance and equipment repair, in automotive and general industry. Long, narrow jaws. Particularly good access to the workpiece due to very slim construction of head and joint area. Firm grip also on flat material due to three-point rest. Push the button for adjustment on the workpiece. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Box-joint design for high stability due to double guide. Reliable catching of the hinge bolt: no unintentional shifting. Favourable lever action: optimum transmission of force. Pinch guard prevents operators' fingers being pinched.
- Adjustment positions: 19
- Capacities for nuts: 34 mm
- Capacities for pipes (diameter): Ø 32 mm
- max. parallel opening width: 37 mm
- max. gripping depth: 42 mm
Technical attributes
Length : 250 mm
Width : 43 mm
Height : 16 mm
Weight : 328 g
Knipex 38 31 200 | Curved Mechanics Pliers | Coated Handle | Black Atramentized – 200mm
38 31 200 Mechanics' Pliers
High bending strength of the pliers tips. cranked, half-round jaws.
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
Technical attributes :
Length : 200 mm
Width : 51 mm
Height : 13 mm
Weight : 176 g
Knipex 38 91 200 | Spark Plug Mechanics Pliers | Coated Handle | Black Atramentized – 200mm
38 91 200 Mechanics' Pliers
High bending strength of the pliers tips. Gripping surfaces cross-hatched, knurled. 45° angled, half-round, long jaws, also suitable for gripping spark plugs and round components (spark plug cover "grabber").
- Jaw thickness (joint) (T1): 9.5 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
- Head angle: 45
Technical attributes:
Length : 200 mm
Width : 51 mm
Height : 13 mm
Weight : 177 g