Knipex
Showing 1–21 of 94 results
Knipex 87 01 125 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 125mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 13
- Capacities for pipes (diameter) - Ø 1 Inch
- Capacities for nuts - 27 mm
- Capacities for pipes (diameter) - Ø 30 mm
Knipex 78 61 125 | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel – 125mm
78 61 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. also suitable for cutting glass fibre cables (fibre optics). cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Special tool steel, oil hardened in multiple stages.
- Cutting capacities medium hard wire (diameter): Ø 1.2 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 70 06 140 | VDE Diagonal Cutter | Multi-Component Handle | Chrome Plated – 140mm
The Knipex 70 06 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 2.5 mm
- Cutting capacities hard wire (diameter) - Ø 1.8 mm
- VDE tested - yes
Knipex 70 05 160 | Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 70 05 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
Knipex 13 96 200 | VDE Multi Function Electrical Installation Pliers | Multi-Component Handle | Chrome Plated – 200mm
13 96 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers. in case of models with opening spring integrated in the joint, the activated locking lever keeps the cutting edges closed while other functions remain active. the intelligent latching mechanism enables you to "grip" without opening the pliers. The cutting edge remains closed and protected.
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
- Capacity in square millimetres: 0.5-2.5 mm²
- AWG: 1 / 0
- VDE tested: yes
Technical attributes
- Length :255 mm
- Width :85 mm
- Height :20 mm
- Weight :276 g
Knipex 86 03 150 | Mini Pliers Wrench – Dual Use Tool | Coated Handle | Chrome Plated – 150mm
86 03 150 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Push the button for adjustment on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. ideal multi-purpose wrench in pocket size. indispensable companion in emergency tool kit.
- Jaw thickness (joint) (B2): 7.0 mm
- Joint thickness (B3): 10.5 mm
- Tips thickness (B1): 4.7 mm
- Adjustment positions: 14
- Capacities for nuts: Ø 1
- Capacities for nuts: 27 mm
Technical attributes :
Length : 165 mm
Width : 50 mm
Height : 25 mm
Weight : 175 g
Knipex 87 01 300 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 300mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions : 30
- Capacities for pipes (diameter) - Ø 2 3/4 Inch
- Capacities for nuts - 60 mm
- Capacities for pipes (diameter) - Ø 70 mm
Knipex 87 01 180 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 180mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
- Pliers: Grey Atramentized
- Head: Polished
- Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 18
- Capacities for pipes (diameter) - Ø 1 1/2 Inch
- Capacities for nuts - 36 mm
- Capacities for pipes (diameter) - Ø 42 mm
Knipex 68 01 200 | End Cutter | Coated Handle | Black Atramentized – 200mm
The Knipex 68 Series End Cutter is one of the most popular products in our range, and for good reason!
Key Features:
- The head shape provides optimal movement when tightening steel mesh knots during reinforced concrete work.
- Cutting edges for soft and hard wire.
- Suitable for twisting and cutting binding wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
- High-grade special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Plastic Coated
Technical Attributes :
The Knipex 68 Series End Cutter is one of the most popular products in our range, and for good reason!
Key Features:
- The head shape provides optimal movement when tightening steel mesh knots during reinforced concrete work.
- Cutting edges for soft and hard wire.
- Suitable for twisting and cutting binding wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
- High-grade special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Plastic Coated
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.5 mm
- Cutting capacities hard wire (diameter) - Ø 2.8 mm
- Cutting edge length mm (C) - 31 mm
Knipex 68 01 180 | End Cutter | Coated Handle | Black Atramentized – 180mm
The Knipex 68 Series End Cutter is one of the most popular products in our range, and for good reason!
Key Features:
- The head shape provides optimal movement when tightening steel mesh knots during reinforced concrete work.
- Cutting edges for soft and hard wire.
- Suitable for twisting and cutting binding wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
- High-grade special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Plastic Coated
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.2 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting edge length mm (C) - 29 mm
Knipex 81 11 250 | Siphon & Connector Pliers (with Plastic Jaws) | Non-Slip Handle | Black Atramentized – 250mm
81 11 250 Siphon and Connector Pliers
Fine adjustment for ideal adjustment to diverse diameters up to 75 mm. For connectors, oil filters, plastic pipes and siphons. ideal for tightening and loosening siphon screw connections, plastic pipe fittings and round union nuts. For connectors and couplings with screw connection, such as Cannon circular connectors. For gentle loosening of hoses on nozzles and filter cartridges. Optimum adhesion on dirt-, oil- and fatfree surfaces. 25-way adjustable box joint. Ergonomic handle geometry. Changeable gripping jaws with two-component plastic insert with a hard carrier component (red) and a soft adhesive component (blue). with exchangeable plastic jaws for sensitive surfaces; up to Ø 75 mm.
- Working Capacity (diameter): Ø 10-75 mm
- Adjustment positions: 25
Technical attributes:
Length : 250 mm
Width : 62 mm
Height : 17 mm
Weight : 355 g
Knipex 86 05 250 | Pliers Wrench – Dual Use Tool | Multi-Component Handle | Chrome Plated – 250mm
86 05 250 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power.
- Jaw thickness (joint) (B2): 8.0 mm
- Joint thickness (B3): 14.0 mm
- Tips thickness (B1): 8.0 mm
- Adjustment positions: 19
- Capacities for nuts: Ø 2
- Capacities for nuts: 52 mm
Knipex 86 03 300 | Pliers Wrench – Dual Use Tool | Coated Handle | Chrome Plated – 300mm
86 03 300 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power.
- Jaw thickness (joint) (B2): 9.5 mm
- Joint thickness (B3): 15.0 mm
- Tips thickness (B1): 9.5 mm
- Adjustment positions: 24
- Capacities for nuts: Ø 212
- Capacities for nuts: 68 mm
Technical attributes :
Length : 310 mm
Width : 75 mm
Height : 20 mm
Weight : 656 g
Knipex 86 03 125 | Mini Pliers Wrench – Dual Use Tool | Coated Handle | Chrome Plated – 125mm
86 03 125 Mini pliers wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. the mini pliers wrench for precision mechanics. particularly suitable for working on small bolted connections. very good access in very confined areas.
- Jaw thickness (joint) (B2): 5.0 mm
- Joint thickness (B3): 9.5 mm
- Tips thickness (B1): 3.0 mm
- Adjustment positions: 11
- Capacities for nuts: Ø 078
- Capacities for nuts: 23 mm
Technical attributes:
Length : 125 mm
Width : 35 mm
Height : 13 mm
Weight : 105 g
Knipex 86 01 250 | Pliers Wrench – Dual Use Tool | Coated Handle | Black Atramentized – 250mm
86 01 250 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Adjustable tightening tool. Also excellent for gripping, holding, pressing and bending workpieces. Push the button for adjustment on the workpiece. Zero backlash jaw pressure prevents damage to edges of sensitive components. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. Reliable catching of the hinge bolt: no unintentional shifting. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power. with scaling for presetting the width apart from the workpiece.
- Jaw thickness (joint) (B2): 8.0 mm
- Joint thickness (B3): 14.0 mm
- Tips thickness (B1): 8.0 mm
- Adjustment positions: 19
- Capacities for nuts: Ø 2
- Capacities for nuts: 52 mm
Technical attributes:
Length : 263mm
Width : 52mm
Height : 17mm
Weight : 465g
Handles : non slip coating
Head : polished
Adjustment positons : 19
Knipex 86 01 180 | Pliers Wrench – Dual Use Tool | Coated Handle | Black Atramentized – 180mm
86 01 180 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Increased gripping capacity thanks to two additional setting positions: variable gripping of all widths across flats up to 40 mm. 10 % less weight with the same stability. Practical adjustment scale: a laser-cut scale allows the wrench opening to be set before gripping. with narrow gripping jaws - for tightening situations that require a slim tool.
- Jaw thickness (joint) (B2): 8.0 mm
- Joint thickness (B3): 12.0 mm
- Tips thickness (B1): 5.0 mm
- Adjustment positions: 15
- Capacities for nuts: Ø 112
- Capacities for nuts: 40 mm
Technical attributes:
Length : 183mm
Width : 46mm
Height : 15mm
Weight : 230 g
Handles : Plastic coated
Head : Polished
Adjustment Positions : 15
Knipex 87 05 250 | Cobra® Water Pump Pliers | Multi-Component Handle | Chrome – 250mm
The product which needs no introduction, the Knipex 87 05 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
- Technical attributes
Adjustments - 25
Capacity For Nuts - 46mm
Capacity For Pipes - 50mm Diameter
Knipex 28 81 280 | Long Reach 45° Bent Needle-Nose Pliers | Coated Handle | Black Atramentized – 280mm SKU: 28 81 280
28 81 280 Long Reach Needle Nose Pliers
for gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design. deep down situated parts can be easily reached using the slim, half-round tips. Careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. Serrated pipe grip to grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering. Slim yet robust tool.
- Jaw thickness (joint) (T1): 9.0 mm
- Tips width (W4): 2.5 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 70.0 mm
- Head width (W3): 20.0 mm
- Gripping surface length (L4): 20 mm
Technical attributes:
Length : 280 mm
Width : 55 mm
Height : 14 mm
Weight : 235 g
Knipex 28 71 280 | Long Reach Straight Needle-Nose Pliers | Coated Handle | Black Atramentized – 280mm
Knipex 13 42 165 | Cutting, Stripping & Dismantling Pliers | Multi-Component Handle | Black Atramentized – 165mm
13 42 165 Stripping Pliers
Multifunctional - cutting and stripping with one pair of pliers. for time-saving stripping of all round sheathed and damp-proof installation cables (e.g. NYM cable). simplified access especially into deep mounted junction boxes thanks to slim head design and optimally angled cable sheath cutter. strip cables easily and without damage thanks to circular cutting edge with depth limiter. Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm². With side cutters for cutting and trimming conductors, wires, small screws and nails. All cutters additionally induction-hardened to approx. 61 HRC for high wear resistance. 30 % lighter than comparable pliers.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Cable stripping values (diameter): 8-13 mm
- Stripping capacities in square millimetres: 0.75-1.5 mm²?/ 2.5 mm²