Showing 43–63 of 133 results
Knipex 78 61 125 | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel – 125mm
78 61 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. also suitable for cutting glass fibre cables (fibre optics). cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Special tool steel, oil hardened in multiple stages.
- Cutting capacities medium hard wire (diameter): Ø 1.2 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 81 11 250 | Siphon & Connector Pliers (with Plastic Jaws) | Non-Slip Handle | Black Atramentized – 250mm
81 11 250 Siphon and Connector Pliers
Fine adjustment for ideal adjustment to diverse diameters up to 75 mm. For connectors, oil filters, plastic pipes and siphons. ideal for tightening and loosening siphon screw connections, plastic pipe fittings and round union nuts. For connectors and couplings with screw connection, such as Cannon circular connectors. For gentle loosening of hoses on nozzles and filter cartridges. Optimum adhesion on dirt-, oil- and fatfree surfaces. 25-way adjustable box joint. Ergonomic handle geometry. Changeable gripping jaws with two-component plastic insert with a hard carrier component (red) and a soft adhesive component (blue). with exchangeable plastic jaws for sensitive surfaces; up to Ø 75 mm.
- Working Capacity (diameter): Ø 10-75 mm
- Adjustment positions: 25
Technical attributes:
Length : 250 mm
Width : 62 mm
Height : 17 mm
Weight : 355 g
Knipex 03 02 180 | Combination Pliers | Multi-Component Handle | Black Atramentized – 180mm
The Knipex 03 02 Series Combination Pliers are one of the top selling pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 03 06 180 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.4 mm
- Cutting capacities hard wire (diameter) - Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded - Ø 12.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 08 26 145 | VDE Needle-Nose Combination Pliers | Multi-Component Handle | Chrome Plated – 145mm
The Knipex 08 26 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
- Handy for confined areas due to slim head design and pointed jaws.
- Groove in gripping area for pulling small nails, pins and bolts.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Knipex 13 82 200 | Electrical Installation Pliers | Multi-Component Handle | Black Atramentized – 200mm
13 82 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers.
Technical Atributes:
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
- Capacity in square millimetres: 0.5-2.5 mm²
- AWG: 1 / 0
- Length : 255 mm
- Width : 85 mm
- Height : 20 mm
- Weight : 280 g
Knipex 13 86 200 | VDE Electrical Installation Pliers | Multi-Component Handle | Chrome Plated – 200mm
13 86 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers. VDE-tested safety up to 1000 volts.
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
- Capacity in square millimetres: 0.5-2.5 mm²
- AWG: 1 / 0
- VDE tested: yes
Technical attributes
- Length :255 mm
- Width :85 mm
- Height : 20 mm
- Weight :280 g
- Surface :Chrome plated
- Handles :insulated with multi-component grips, VDE-tested
- Head : Chrome plated