You must be logged in to post a review.
14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
40.00 JD
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
– Cutting capacities soft wire (diameter): Ø 2.5 mm
– Cutting capacities medium hard wire (diameter): Ø 1.5 mm
– Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
– AWG: 16?/ 14
– VDE tested: yes
Technical attributes
Length : 175 mm
Width : 60 mm
Height : 30 mm
Weight : 216 g
| Weight | 0.216 kg |
|---|
Reviews (0)
Related products
Knipex 28 81 280 | Long Reach 45° Bent Needle-Nose Pliers | Coated Handle | Black Atramentized – 280mm SKU: 28 81 280
28 81 280 Long Reach Needle Nose Pliers
for gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design. deep down situated parts can be easily reached using the slim, half-round tips. Careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. Serrated pipe grip to grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering. Slim yet robust tool.
- Jaw thickness (joint) (T1): 9.0 mm
- Tips width (W4): 2.5 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 70.0 mm
- Head width (W3): 20.0 mm
- Gripping surface length (L4): 20 mm
Technical attributes:
Length : 280 mm
Width : 55 mm
Height : 14 mm
Weight : 235 g
Knipex 76 05 125 | Diagonal Cutter For Electromechanics | With Comfort Handle | Chrome Plated – 125mm
76 05 125 - Diagonal Cutter For electromechanics
- With sharp, precisely aligned cutting edges
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 63 HRC
- Lap joint
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical attributes:
- Cutting capacities medium hard wire (diameter) - Ø 2.3 mm
- Cutting capacities hard wire (diameter) - Ø 1.5 mm
- Cutting capacities piano wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 03 mm
- Jaw length (B) - 16 mm
- Jaw thickness (joint) (D) - 9 mm
- Head width (A) - 14.5 mm
Knipex 31 11 160 | Flat Needle- Nose Pliers – 160mm
31 11 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes:
Jaw thickness (joint) (T1) - 7.5 mm
Tips width (W4) - 1.8 mm
Tips thickness (T2) - 2.5 mm
Jaw length (L3) - 55.0 mm
Head width (W3) - 16.0 mm
Reviews
There are no reviews yet.