You must be logged in to post a review.
Knipex 72 02 125 | Diagonal Cutting Plier For Plastic | Multi-Component Handle | Polished – 125mm
24.00 JD
72 02 125Diagonal Cutters for plastics
The Knipex 72 02 125 are the smallest Knipex diagonal cutters for plastic. They are used when moulded parts need to be mechanically separated from sprue after demoulding. They are also suitable for delicate work, e.g. in model making. Their surface ground cutting faces produce a clean, flush separation of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component.
Key Features :
– Cutting face flush
– For nearly flush cutting of moulded plastic components from sprues
– Cuts soft materials such as lead in a flush cut
– With opening spring
| Weight | 0.109 kg |
|---|
Reviews (0)
Related products
Knipex 14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes:
- Length: 175 mm
- Width : 60 mm
- Height: 30 mm
- Weight: 216 g
Knipex 28 81 280 | Long Reach 45° Bent Needle-Nose Pliers | Coated Handle | Black Atramentized – 280mm SKU: 28 81 280
28 81 280 Long Reach Needle Nose Pliers
for gripping, adjustment and assembly work in hard to reach areas thanks to slim, very long design. deep down situated parts can be easily reached using the slim, half-round tips. Careful yet reliable gripping, holding and guiding of small copper pipes, screws and cables as well as other round parts thanks to milled grooves with smooth surfaces. Serrated pipe grip to grip round parts. Particularly suitable for work in the automotive trade and in mechanical engineering. Slim yet robust tool.
- Jaw thickness (joint) (T1): 9.0 mm
- Tips width (W4): 2.5 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 70.0 mm
- Head width (W3): 20.0 mm
- Gripping surface length (L4): 20 mm
Technical attributes:
Length : 280 mm
Width : 55 mm
Height : 14 mm
Weight : 235 g
Knipex 13 42 165 | Cutting, Stripping & Dismantling Pliers | Multi-Component Handle | Black Atramentized – 165mm
13 42 165 Stripping Pliers
Multifunctional - cutting and stripping with one pair of pliers. for time-saving stripping of all round sheathed and damp-proof installation cables (e.g. NYM cable). simplified access especially into deep mounted junction boxes thanks to slim head design and optimally angled cable sheath cutter. strip cables easily and without damage thanks to circular cutting edge with depth limiter. Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm². With side cutters for cutting and trimming conductors, wires, small screws and nails. All cutters additionally induction-hardened to approx. 61 HRC for high wear resistance. 30 % lighter than comparable pliers.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Cable stripping values (diameter): 8-13 mm
- Stripping capacities in square millimetres: 0.75-1.5 mm²?/ 2.5 mm²
Reviews
There are no reviews yet.