You must be logged in to post a review.
13 02 160 | Long Nose Electrical Pliers ( Cutter & Crimper ) – 160mm
34.00 JD
Electricians’ Pliers
Key Features:
– The ideal pliers for cable work
– Geeignet zum Schneiden, Biegen, Greifen, Crimpen und Abisolieren
– For gripping and bending wire
– For cutting medium hard and hard wire
– Precision cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC
– With precision stripping holes
– For crimping wire ferrules
– With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical attributes:
– Stripping capacities in square millimetres -0.5 — 0.75 / 1.5 / 2.5 mm²
| Weight | 0.139 kg |
|---|
Reviews (0)
Related products
32 11 135 | Relay Adjusting Pliers | Coated Handle – 135mm
32 11 135 Relay Adjusting Pliers
- For gripping components and wires of the smallest diameters and for bending contact and relay springs
- Polished gripping surfaces
- Edges carefully deburred
Technical attributes :
- Jaw thickness (joint) (D) - 7.0 mm
- Tips width (E) - 1.0 mm
- Tips thickness (F) - 2.0 mm
- Jaw length (B) - 34.0 mm
- Head width (A) - 12.5 mm
31 25 160 – Needle Nose Pliers Flat | | Multi-Component Handle | Black Atramentized – 160mm
31 25 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes :
- Jaw thickness (joint) (T1) - 7.5 mm
- Tips width (W4) - 1.8 mm
- Tips thickness (T2) - 2.5 mm
- Gripping surface length (L4) - 27.0 mm
- Jaw length (L3) - 55.0 mm
- Head width (W3) - 16.0 mm
26 22 200 | Snipe Nose Side-Cutting (Stork Beak) Bent Pliers | Multi-Component Handle | Black Atramentized – 200mm
26 22 200 Snipe Nose Side Cutting Pliers
Elastic tips: dimensionally stable even when twisted. Distortion-tolerant, elastic precision tips. Half-round, long, tapered jaws. With cutting edges for soft, medium-hard and hard wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC. 40° angled jaws.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Gripping surface length (L4): 23.0 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 18 mm
Technical attributes
- Length : 205 mm
- Width : 53 mm
- Height : 19 mm
- Weight : 197 g
- Handles : With multi component grips
- Head : Polished
- Beve : Cutting edges with bevel
Reviews
There are no reviews yet.