Showing 22–42 of 94 results
Knipex 77 02 115 | Electronics Diagonal Cutter With Box Joint | Multi-Component Handle | Mirror Polished – 115mm
77 02 115 Electronics Diagonal Cutter
With box joint
- Durable, load-optimised design with backlash-free box joint
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- Less physical effort due to very high transmission ratio
- Load-optimised for a more direct feel when working
- Low-friction double spring for smooth and even opening
- The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 62 HRC
- Round head, with small bevel
Technical attributes :
- Cutting capacities medium hard wire (diameter) - Ø 1.2 mm
- Cutting capacities hard wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 01 mm
- Jaw length (B) - 14 mm
- Jaw thickness (joint) (D) - 7.5 mm
- Head width (A) - 11 mm
Knipex 78 61 125 | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel – 125mm
78 61 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. also suitable for cutting glass fibre cables (fibre optics). cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Special tool steel, oil hardened in multiple stages.
- Cutting capacities medium hard wire (diameter): Ø 1.2 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 73 72 180 F | Twin Force High Performance Diagonal Cutters With Opening Spring | Multi-Component Handle | Black Atramentized – 180mm
73 72 180 F
KNIPEX TwinForce® High Performance Diagonal Cutters With opening spring
- The superior High-Leverage Diagonal Cutter with patented double joint
- Ideal transmission of force due to double-hinged design
- Reliably cuts all types of wire, including steel tape
- For rough or very fine cutting
- Low cutting impact: gentle on hands. The tension on muscles and tendons is relieved
- For comfortable cutting, repetitive cutting or extremely hard cutting jobs
- High degree of stability and zero-backlash due to precisely milled forged-in axles
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- With opening spring to simplify reapplication and for repetitive cutting
Technical attributes :
- Cutting capacities soft wire (diameter) - Ø 5 mm
- Cutting capacities medium hard wire (diameter) - Ø 4.6 mm
- Cutting capacities hard wire (diameter) - Ø 3.2 mm
- Cutting capacities piano wire (diameter) - Ø 3.0 mm
Knipex 16 40 150 | Stripping Tool
16 40 150 KNIPEX Stripping Tool
- For removing the insulation of round cables exceeding 25.0 mm dia.
- Removes all sheaths of standard cables
- Suitable for longitudinal and circular cutting
- Cutting depth can be adjusted up to 5.0 mm
- Replaceable blade (both sides can be used)
- Cutting depth can be adjusted up to 5.0 mm
- Stripping capacities (diametre) > K 25 mm
Technical attributes:
- Length: 150 mm
- Width : 53 mm
- Height: 28 mm
- Weight: 210 g
Knipex 16 60 06 SB | Co-Axial & Data Cable Wire Stripping Tool
16 60 06 SB Wire Stripping Tool for coax and data cable
Universal stripping tool for Coax cables RG 59, RG 6, RG 7, RG 11. For stripping outer sheath, shield and insulation in a single process. Adjustable stripping blade for data cable. Two stripping blades for cutting and stripping telephone ribbon cable (4P/6P/8P) in a single operation. Integrated blade for cutting data cables.
Cable type: RG 59. RG 6. RG 7. RG 11
Technical attributes:
- Length : 215 mm
- Width : 120 mm
- Height : 23 mm
- Weight : 100 g
- Cable type : RG 59, RG 6, RG 7, RG 11
Knipex 12 21 180 | Insulation Stripper – With adapted blades – 180mm
Key Features:
- With replaceable blades for 4 (adapted to diameters) or 6 (adapted to cross-sections) different conductor cross-sections
- Leave wire undamaged thanks to precision-ground blade shapes, even multi-stranded conductors are stripped gently
- During stripping, the wire is held firmly by clamping jaws
- With length stop for constant stripping length during repetitive work
- A spring leads the stripper back to the starting position
Technical attributes:
- Stripping capacities in square millimetres : 0.5 — 0.75 / 1.0 / 1.5 / 2.5 / 4.0 / 6.0 mm²
- AWG : 20 — 18 / 16 / 14 / 12 / 10
Knipex 73 02 160 | X-Cut® High-Leverage Diagonal Cutter | Multi-Component Handle | Black Atramentized – 160mm
73 02 160 KNIPEX X-Cut®
cuts finest strands as well as multi-core cables and piano wires. Powerful, light and universal. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Box-joint design: highest stability with low weight. Doubly supported joint axis for heavy duty. Large opening width for thicker cables. Cuts precisely, even through fine copper wires. Compact, low-weight construction. Universally usable, in the assembly, maintenance and production. 40% less force required compared with standard diagonal cutters of the same length.
- Cutting capacities soft wire (diameter): Ø 4.8 mm
- Cutting capacities medium hard wire (diameter): Ø 3.8 mm
- Cutting capacities hard wire (diameter): Ø 2.7 mm
- Cutting capacities piano wire (diameter): Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded: Ø 12.0 mm
Technical attributes
Length : 165 mm
Width : 60 mm
Height : 21 mm
Weight : 175 g
Knipex 72 21 160 | Diagonal Cutter For Plastics | Cutting Edges 90° | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 72 21 160 Diagonal Cutter For Plastics
Due to their cutting faces at an angle of 90°, the Knipex 72 21 160 diagonal cutters are suitable for work perpendicular to the component. This approach is necessary when access from the side is not possible, as with angled plastic mould parts or machine components.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes:
- Length: 175 mm
- Width : 60 mm
- Height: 30 mm
- Weight: 216 g
Knipex 74 06 160 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.4 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting capacities piano wire (diameter) - Ø 2.0 mm
- VDE tested - yes
14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes
Length : 175 mm
Width : 60 mm
Height : 30 mm
Weight : 216 g
Knipex 08 05 110 | Mini Combination Pliers | Multi-Component Handle | Chrome Plated – 110mm
Knipex 08 05 Series Mini Combination Pliers
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Specification:
- Cutting Capacity (Medium/Hard Wire): 2.5mm Ø Dia
- Cutting Capacity (Hard Wire): 1.6mm Ø Dia
- Cutting Capacity (Multi-Strand Copper Cable): 9mm Ø Dia or 10.0mm²
Knipex 08 22 145 | Needle-Nose Combination Pliers | Multi-Component Handle | Black Atramentized – 145mm
The Knipex 08 22 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
- Handy for confined areas due to slim head design and pointed jaws.
- Groove in gripping area for pulling small nails, pins and bolts.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 03 06 200 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 200mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting capacity copper cable, multiple-stranded - Ø 13.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 03 06 160 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attribute :
- Cutting capacities medium hard wire (diameter) - Ø 3.1 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
- Cutting capacity copper cable, multiple-stranded - Ø 10.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 03 02 160 | Combination Pliers | Multi-Component Handle | Black Atramentized – 160mm
The Knipex 03 02 Series Combination Pliers are one of the top selling pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 72 01 160 | Diagonal Cutters for Plastics | Plastic Coated Handle | Black Atramentized – 160mm
72 01 160 Diagonal Cutters for plastics
The Knipex 72 01 160 is used in plastics production when, for example, plastic moulded parts need to be mechanically separated from sprue after demoulding.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
- Improved transmission ratio for 25 % more cutting performance
Technical Attributes :
- Head - polished
- Handles - plastic coated
- Weight - 164 g
- Dimensions - 160 x 50 x 15 mm
- REACH compliant - does not contain SVHC
- RoHS compliant - not applicable
Knipex 78 03 125 | Electronics Super Knips® | Multi-Component Handle | Polished Head / INOX Steel – 125mm
78 03 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. cutting edge hardness approx. 54 HRC. INOX tool steel.
- Cutting capacities medium hard wire (diameter): Ø 1.0 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 72 02 125 | Diagonal Cutting Plier For Plastic | Multi-Component Handle | Polished – 125mm
72 02 125Diagonal Cutters for plastics
The Knipex 72 02 125 are the smallest Knipex diagonal cutters for plastic. They are used when moulded parts need to be mechanically separated from sprue after demoulding. They are also suitable for delicate work, e.g. in model making. Their surface ground cutting faces produce a clean, flush separation of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component.
Key Features :
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring