Showing 43–63 of 94 results
Knipex 14 25 160 | Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated- 160mm
14 25 160
Diagonal Insulation Stripper
Key Features :
- With long cutter
- High cutting capacity due to high leverage joint
- Precision stripping holes for single conductors of 1.5 and 2.5 mm²
- Convenient cutting of NYM cables up to 5 x 2.5 mm²
- Long tips for ultra fine cutting work also in confined areas
- Induction-hardened precision blades, cutting edge hardness approx. 60 HRC
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Knipex 74 06 180 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.7 mm
- Cutting capacities piano wire (diameter) - Ø 2.2 mm
- VDE tested - yes
Knipex 70 06 140 | VDE Diagonal Cutter | Multi-Component Handle | Chrome Plated – 140mm
The Knipex 70 06 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 2.5 mm
- Cutting capacities hard wire (diameter) - Ø 1.8 mm
- VDE tested - yes
Knipex 70 02 180 | Diagonal Cutter | Multi-Component Handle | Black Atramentized – 180mm
The Knipex 70 02 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
Knipex 70 05 160 | Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 70 05 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
Knipex 13 96 200 | VDE Multi Function Electrical Installation Pliers | Multi-Component Handle | Chrome Plated – 200mm
13 96 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers. in case of models with opening spring integrated in the joint, the activated locking lever keeps the cutting edges closed while other functions remain active. the intelligent latching mechanism enables you to "grip" without opening the pliers. The cutting edge remains closed and protected.
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
- Capacity in square millimetres: 0.5-2.5 mm²
- AWG: 1 / 0
- VDE tested: yes
Technical attributes
- Length :255 mm
- Width :85 mm
- Height :20 mm
- Weight :276 g
Knipex 13 92 200 | Electrical Installation Pliers w/ Locking Lever | Multi-Component Handle | Black Atramentized – 200mm
13 92 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers. in case of models with opening spring integrated in the joint, the activated locking lever keeps the cutting edges closed while other functions remain active. the intelligent latching mechanism enables you to "grip" without opening the pliers. The cutting edge remains closed and protected.
Cutting capacity copper cable, multiple-stranded: Ø 15 mm
Cutting capacity copper cable, multiple-stranded: 50 mm²
Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
Capacity in square millimetres: 0.5-2.5 mm²
AWG: 1 / 0
Technical attributes:
- Length:210 mm
- Width :63 mm
- Height:21 mm
- Weight:260 g
Knipex 16 30 135 SB | Spiral Cutting Stripping Tool | 6mm-29mm
16 30 135 SB Dismantling Tool
For stripping round cable sheaths made of PVC, rubber, silicone or PTFE. Self-tightening holding lever. With knurled nut for cutting depth adjustment. Changing from circular to longitudinal cutting by turning the tool body. Spiral cutting for removing intermediate pieces. Replaceable blade.
- Stripping capacities (diameter): Ø 6.0-29.0 mm
Technical attributes:
- Length: 180 mm
- Width : 85 mm
- Height: 36 mm
- Weight: 120 g
Knipex 12 80 100 SB | Mini Wire Stripper
12 80 100 Mini Wire Strippe
Precise stripping, stepwise adjustment to the conductor diameters. With wire cutter
Key Features:
- Precise stripping, stepwise adjustment to the conductor diameters
- With wire cutter
- Adjustable length stop from 4.0 - 15.0 mm
- With locking device
- For thin copper conductors Ø 0.3 to 1.0 mm
Technical attributes
- Length : 200 mm
- Width : 95 mm
- Height : 21 mm
- Weight : 202 g
Knipex 16 60 100 SB | Stripping Tool for Coax Cable Universal
6 60 100 SB
Stripping Tool for coax cable - Universal
- For stripping all common coax cables between Ø 4.8 - 7.5 mm (e.g. for TV- and satellite antenna), also suitable for PVC round cable 3 x 0.75 mm²
- With length scale 5.0 - 20.0 mm
- Double shell, folding back stripping tool
- With opening spring and locking device
Technical Attributes :
- RoHS compliant - not applicable
- Cable type - Coax cables 4.8 - 7.5 round cables 3 x 0.75 mm²
Knipex 97 40 10 | Punch Down Tool
Knipex 97 40 20 SB | Compression Tool for Coax Connector
97 40 20 SB Compression Tool
for crimping F, BNC and RCA connectors. robust design. Suitable for RG 59 / 6 / 11 cable. Rotatable head for different cable sizes. Rotatable insert for various types of connector. Adjusting screw for various connector lengths. Applicable among others for compression connectors Kathrein EMK 12; Cablecon F-56 CX3 5.1; Astro FKS 06. self-service card/blister.
Applications: for F. BNC and RCA connectors.
Technical attributes :
Length : 175 mm
Width : 57 mm
Height : 25 mm
Weight : 430 g
Knipex 97 52 30 | PreciForce® Crimping Pliers | Multi Component Grip
97 52 30 KNIPEX PreciForce® Crimping Pliers
- Consistently high crimping quality due to precision dies and ratchet mechanism (unlockable)
- Precise, factory calibrated crimping pressure
- High crimping force due to efficient lever action
- Good handling due to favourable handle position, low weight, short design and ergonomically shaped handles
- Crimping die is not exchangeable
Technical attributes:
- Application - non-insulated terminals in accordance with DIN 46235 and crimp connectors in accordance with DIN 46267
- Capacity in square millimetres - 1.5 — 10.0 mm²
- Number of crimp profiles - 5
- AWG - 16 — 8
Knipex 97 78 180 | VDE Crimping Pliers for Wire Ferrules | Multi-Component Handle | Polished Head – 180mm
97 78 180 Crimping Pliers for wire ferrules
light and slim design. also as VDE version. easy crimping due to optimised transmission ratio. For crimping wire ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm². Crimping in marked half-round dies for reliable connections between the sleeve and the conductor. 9 particularly deep dies with conical side faces.
- Applications: Wire ferrules
- Capacity in square millimetres: 0.25-16.0 mm²
- Number of crimping positions: 9
- AWG: 24-6
Technical attributes
Length : 185 mm
Width : 54 mm
Height : 28 mm
Weight : 254 g
Knipex 97 51 12 | Crimping Pliers for RJ10 / RJ11 / RJ12 + RJ45 Western Plugs | Multi-Component Handle – 200mm
97 51 12 Crimping Pliers for Western plugs
Professional tool for cutting and stripping unshielded ribbon telephone cables. For crimping 4-, 6- and 8-pole Western plugs type RJ 10 (7.65mm width), RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width); long design. Precise crimping process thanks to parallel crimping. Repetitive, high crimping quality due to integral lock (self-releasing mechanism). With length cutter and stripping knife for ribbon cables 6 and 12 mm length. With additional stripping device for round cables.
- Capacity: RJ 10 (4-poles) 7.65mm RJ 11/12 (6-poles) 9.65 mm RJ 45 (8-poles) 11.68 mm
- Number of crimping positions: 3
- Range of applications: Western plugs
Technical attributes
Length : 190 mm
Width : 70 mm
Height : 18 mm
Weight : 340 g
Surface : burnished
Handles : multi-component grips
Applications : Western plugs
Knipex 97 51 10 | Crimping Pliers for RJ11 / RJ12 Western Plugs | Multi-Component Handle – 190mm
97 51 10 SB Crimping Pliers for Western plugs
Professional tool for cutting and stripping unshielded ribbon telephone cables. For crimping 6- and 8-pole Western plugs type RJ 11/12 (9.65 mm width) and type RJ 45 (11.68 mm width); long design. Precise crimping process thanks to parallel crimping. Repetitive, high crimping quality due to integral lock (self-releasing mechanism). With length cutter and stripping knife for ribbon cables 6 and 12 mm length. With additional stripping device for round cables. self-service card/blister.
- Capacity: RJ 11/12 (6-poles) 9.65 mm RJ 45 (8-poles) 11.68 mm
- Number of crimping positions: 2
- Range of applications: Western plugs
Technical attributes :
Length : 189 mm
Width : 76 mm
Height : 24 mm
Weight : 299 g
Knipex 95 16 165 | VDE Cable Shears | Multi-Component Handle – 165mm
95 16 165 Cable Shears
For cutting copper and aluminium single conductors as well as multiple stranded cables. Clean and smooth cut without crushing and deformation. Not suitable for steel wire and hard drawn copper conductors. Precision-ground, hardened blades. Easy cutting with one-hand operation. With guard. Adjustable bolted joint, self-retaining screw.
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
- AWG: 1 / 0
- VDE tested: yes
Technical attributes
Length : 180 mm
Width : 47 mm
Height : 21 mm
Weight : 262 g
Knipex 95 12 165 | Cable Shears | Multi-Component Handle – 165mm
Product Description
95 12 165 Cable Shears
For cutting copper and aluminium single conductors as well as multiple stranded cables. Clean and smooth cut without crushing and deformation. Not suitable for steel wire and hard drawn copper conductors. Precision-ground, hardened blades. Easy cutting with one-hand operation. With guard. Adjustable bolted joint, self-retaining screw.
- Cutting capacity copper cable, multiple-stranded: 50 mm²
- Cutting capacity copper cable, multiple-stranded: Ø 15 mm
AWG: 1 / 0
Technical attributes
Length : 180 mm
Width : 52 mm
Height : 22 mm
Weight : 250 g
Knipex 85 51 250 A | Spring Hose Clamp Pliers | Non-Slip Handle | Grey Atramentized – 250mm
85 51 250 A Spring Hose Clamp Pliers
Rotating, universal grip inserts for reliably gripping the clamps in all positions. Jaw inserts can also be rotated under load. Extremely good leverage which allows clamps to be opened easily without great effort. Slim head design; narrow head width, rotating grip inserts make this an ideal tool, especially in confined areas. Additional function: detach hoses gently using the serrated jaw. quick-set adjustment: adjusts by shifting directly onto the workpiece. can be used for standard, space-saving, spring wire hose clamps and for spring band clamps up to 70 mm nominal size. allows more than 40 mm clamping range.
- Capacity: Ø max. 70 mm
- Adjustment positions: 25
Technical attributes
- Length : 252mm
- Width : 50mm
- Height : 20mm
- Weight : 345g
- Surface : Grey Atramentized
- Handles : With non slip plastic coating
-Adjustment Positions : 25
Knipex 87 51 250 | Cobra® Extra-Slim Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 250mm
87 51 250 KNIPEX Cobra® ES
Ideal for service, maintenance and equipment repair, in automotive and general industry. Long, narrow jaws. Particularly good access to the workpiece due to very slim construction of head and joint area. Firm grip also on flat material due to three-point rest. Push the button for adjustment on the workpiece. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Box-joint design for high stability due to double guide. Reliable catching of the hinge bolt: no unintentional shifting. Favourable lever action: optimum transmission of force. Pinch guard prevents operators' fingers being pinched.
- Adjustment positions: 19
- Capacities for nuts: 34 mm
- Capacities for pipes (diameter): Ø 32 mm
- max. parallel opening width: 37 mm
- max. gripping depth: 42 mm
Technical attributes
Length : 250 mm
Width : 43 mm
Height : 16 mm
Weight : 328 g
Knipex 86 03 250 | Pliers Wrench – Dual Use Tool | Coated Handle | Chrome Plated – 250mm
86 03 250 Pliers Wrench
replaces the need for sets of metric and imperial spanners. smooth jaws for damage free installation of plated fittings - working directly on chrome!. Also excellent for gripping, holding, pressing and bending workpieces. Zero backlash jaw pressure prevents damage to edges of sensitive components. Fast adjustment by pushing a button directly on the workpiece. No unintentional shift of the gripping jaws and no slipping of the joint. Parallel jaws give a more solid grip; its design allows flexible adjustment of all widths up to the specified maximum size. The ratchet type principle allows quick and easy tightening and release of all bolted connections. Lever transmission greater than 10 : 1 for strong gripping power.
- Jaw thickness (joint) (B2): 8.0 mm
- Joint thickness (B3): 14.0 mm
- Tips thickness (B1): 8.0 mm
- Adjustment positions: 19
- Capacities for nuts: Ø 2
- Capacities for nuts: 52 mm
Technical attributes:
Length : 262 mm
Width : 53 mm
Height : 18 mm
Weight : 465 g