Showing 22–42 of 94 results
Knipex 13 02 160 | Long Nose Electrical Pliers ( Cutter & Crimper ) – 160mm
Electricians' Pliers
Key Features:
- The ideal pliers for cable work
- Geeignet zum Schneiden, Biegen, Greifen, Crimpen und Abisolieren
- For gripping and bending wire
- For cutting medium hard and hard wire
- Precision cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC
- With precision stripping holes
- For crimping wire ferrules
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical attributes:
- Stripping capacities in square millimetres -0.5 — 0.75 / 1.5 / 2.5 mm²
Knipex 38 91 200 | Spark Plug Mechanics Pliers | Coated Handle | Black Atramentized – 200mm
38 91 200 Mechanics' Pliers
High bending strength of the pliers tips. Gripping surfaces cross-hatched, knurled. 45° angled, half-round, long jaws, also suitable for gripping spark plugs and round components (spark plug cover "grabber").
- Jaw thickness (joint) (T1): 9.5 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
- Head angle: 45
Technical attributes:
Length : 200 mm
Width : 51 mm
Height : 13 mm
Weight : 177 g
Knipex 38 71 200 | High bending Mechanicians Long Nose 70° Angled Pliers | Coated Handle | Black Atramentized- 200mm
Knipex 38 31 200 | Curved Mechanics Pliers | Coated Handle | Black Atramentized – 200mm
38 31 200 Mechanics' Pliers
High bending strength of the pliers tips. cranked, half-round jaws.
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
Technical attributes :
Length : 200 mm
Width : 51 mm
Height : 13 mm
Weight : 176 g
Knipex 31 11 160 | Flat Needle- Nose Pliers – 160mm
31 11 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes:
Jaw thickness (joint) (T1) - 7.5 mm
Tips width (W4) - 1.8 mm
Tips thickness (T2) - 2.5 mm
Jaw length (L3) - 55.0 mm
Head width (W3) - 16.0 mm
Knipex 33 03 160 | Flat Nose Telephone Duck Pliers | Coated Handle | Chrome-Plated- 160mm
Knipex 29 11 160 | Telephone Pliers | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 32 11 135 | Relay Adjusting Pliers | Coated Handle – 135mm
32 11 135 Relay Adjusting Pliers
- For gripping components and wires of the smallest diameters and for bending contact and relay springs
- Polished gripping surfaces
- Edges carefully deburred
Technical attributes :
- Jaw thickness (joint) (D) - 7.0 mm
- Tips width (E) - 1.0 mm
- Tips thickness (F) - 2.0 mm
- Jaw length (B) - 34.0 mm
- Head width (A) - 12.5 mm
Knipex 31 25 160 – Needle Nose Pliers Flat | | Multi-Component Handle | Black Atramentized – 160mm
31 25 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes :
- Jaw thickness (joint) (T1) - 7.5 mm
- Tips width (W4) - 1.8 mm
- Tips thickness (T2) - 2.5 mm
- Gripping surface length (L4) - 27.0 mm
- Jaw length (L3) - 55.0 mm
- Head width (W3) - 16.0 mm
Knipex 26 22 200 | Snipe Nose Side-Cutting (Stork Beak) Bent Pliers | Multi-Component Handle | Black Atramentized – 200mm
26 22 200 Snipe Nose Side Cutting Pliers
Elastic tips: dimensionally stable even when twisted. Distortion-tolerant, elastic precision tips. Half-round, long, tapered jaws. With cutting edges for soft, medium-hard and hard wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC. 40° angled jaws.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Gripping surface length (L4): 23.0 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 18 mm
Technical attributes
- Length : 205 mm
- Width : 53 mm
- Height : 19 mm
- Weight : 197 g
- Handles : With multi component grips
- Head : Polished
- Beve : Cutting edges with bevel
Knipex 29 25 160 | Telephone Long Nose Pliers | Multi-Component Handle | Chrome Plated – 160mm
29 25 160 Telephone Pliers
- Extra slim, fine tips
- Also suitable for soldering work
- Gripping surfaces cross-hatched
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical Attributes:
- Jaw thickness (joint) (T1) - 9.0 mm
- Tips width (W4) - 2.0 mm
- Tips thickness (T2) - 2.0 mm
- Jaw length (L3) - 54.0 mm
- Head width (W3) - 14.0 mm
Knipex 77 02 115 | Electronics Diagonal Cutter With Box Joint | Multi-Component Handle | Mirror Polished – 115mm
77 02 115 Electronics Diagonal Cutter
With box joint
- Durable, load-optimised design with backlash-free box joint
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- Less physical effort due to very high transmission ratio
- Load-optimised for a more direct feel when working
- Low-friction double spring for smooth and even opening
- The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 62 HRC
- Round head, with small bevel
Technical attributes :
- Cutting capacities medium hard wire (diameter) - Ø 1.2 mm
- Cutting capacities hard wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 01 mm
- Jaw length (B) - 14 mm
- Jaw thickness (joint) (D) - 7.5 mm
- Head width (A) - 11 mm
Knipex 73 72 180 F | Twin Force High Performance Diagonal Cutters With Opening Spring | Multi-Component Handle | Black Atramentized – 180mm
73 72 180 F
KNIPEX TwinForce® High Performance Diagonal Cutters With opening spring
- The superior High-Leverage Diagonal Cutter with patented double joint
- Ideal transmission of force due to double-hinged design
- Reliably cuts all types of wire, including steel tape
- For rough or very fine cutting
- Low cutting impact: gentle on hands. The tension on muscles and tendons is relieved
- For comfortable cutting, repetitive cutting or extremely hard cutting jobs
- High degree of stability and zero-backlash due to precisely milled forged-in axles
- Cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC
- With opening spring to simplify reapplication and for repetitive cutting
Technical attributes :
- Cutting capacities soft wire (diameter) - Ø 5 mm
- Cutting capacities medium hard wire (diameter) - Ø 4.6 mm
- Cutting capacities hard wire (diameter) - Ø 3.2 mm
- Cutting capacities piano wire (diameter) - Ø 3.0 mm
Knipex 16 40 150 | Stripping Tool
16 40 150 KNIPEX Stripping Tool
- For removing the insulation of round cables exceeding 25.0 mm dia.
- Removes all sheaths of standard cables
- Suitable for longitudinal and circular cutting
- Cutting depth can be adjusted up to 5.0 mm
- Replaceable blade (both sides can be used)
- Cutting depth can be adjusted up to 5.0 mm
- Stripping capacities (diametre) > K 25 mm
Technical attributes:
- Length: 150 mm
- Width : 53 mm
- Height: 28 mm
- Weight: 210 g
Knipex 16 60 06 SB | Co-Axial & Data Cable Wire Stripping Tool
16 60 06 SB Wire Stripping Tool for coax and data cable
Universal stripping tool for Coax cables RG 59, RG 6, RG 7, RG 11. For stripping outer sheath, shield and insulation in a single process. Adjustable stripping blade for data cable. Two stripping blades for cutting and stripping telephone ribbon cable (4P/6P/8P) in a single operation. Integrated blade for cutting data cables.
Cable type: RG 59. RG 6. RG 7. RG 11
Technical attributes:
- Length : 215 mm
- Width : 120 mm
- Height : 23 mm
- Weight : 100 g
- Cable type : RG 59, RG 6, RG 7, RG 11
Knipex 12 21 180 | Insulation Stripper – With adapted blades – 180mm
Key Features:
- With replaceable blades for 4 (adapted to diameters) or 6 (adapted to cross-sections) different conductor cross-sections
- Leave wire undamaged thanks to precision-ground blade shapes, even multi-stranded conductors are stripped gently
- During stripping, the wire is held firmly by clamping jaws
- With length stop for constant stripping length during repetitive work
- A spring leads the stripper back to the starting position
Technical attributes:
- Stripping capacities in square millimetres : 0.5 — 0.75 / 1.0 / 1.5 / 2.5 / 4.0 / 6.0 mm²
- AWG : 20 — 18 / 16 / 14 / 12 / 10
Knipex 73 02 160 | X-Cut® High-Leverage Diagonal Cutter | Multi-Component Handle | Black Atramentized – 160mm
73 02 160 KNIPEX X-Cut®
cuts finest strands as well as multi-core cables and piano wires. Powerful, light and universal. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Box-joint design: highest stability with low weight. Doubly supported joint axis for heavy duty. Large opening width for thicker cables. Cuts precisely, even through fine copper wires. Compact, low-weight construction. Universally usable, in the assembly, maintenance and production. 40% less force required compared with standard diagonal cutters of the same length.
- Cutting capacities soft wire (diameter): Ø 4.8 mm
- Cutting capacities medium hard wire (diameter): Ø 3.8 mm
- Cutting capacities hard wire (diameter): Ø 2.7 mm
- Cutting capacities piano wire (diameter): Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded: Ø 12.0 mm
Technical attributes
Length : 165 mm
Width : 60 mm
Height : 21 mm
Weight : 175 g
Knipex 72 21 160 | Diagonal Cutter For Plastics | Cutting Edges 90° | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 72 21 160 Diagonal Cutter For Plastics
Due to their cutting faces at an angle of 90°, the Knipex 72 21 160 diagonal cutters are suitable for work perpendicular to the component. This approach is necessary when access from the side is not possible, as with angled plastic mould parts or machine components.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes:
- Length: 175 mm
- Width : 60 mm
- Height: 30 mm
- Weight: 216 g
Knipex 74 06 160 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.4 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting capacities piano wire (diameter) - Ø 2.0 mm
- VDE tested - yes