Showing 43–63 of 94 results
14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes
Length : 175 mm
Width : 60 mm
Height : 30 mm
Weight : 216 g
Knipex 08 05 110 | Mini Combination Pliers | Multi-Component Handle | Chrome Plated – 110mm
Knipex 08 05 Series Mini Combination Pliers
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Specification:
- Cutting Capacity (Medium/Hard Wire): 2.5mm Ø Dia
- Cutting Capacity (Hard Wire): 1.6mm Ø Dia
- Cutting Capacity (Multi-Strand Copper Cable): 9mm Ø Dia or 10.0mm²
Knipex 08 22 145 | Needle-Nose Combination Pliers | Multi-Component Handle | Black Atramentized – 145mm
The Knipex 08 22 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
- Handy for confined areas due to slim head design and pointed jaws.
- Groove in gripping area for pulling small nails, pins and bolts.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 03 06 200 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 200mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting capacity copper cable, multiple-stranded - Ø 13.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 03 06 160 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attribute :
- Cutting capacities medium hard wire (diameter) - Ø 3.1 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
- Cutting capacity copper cable, multiple-stranded - Ø 10.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 03 02 160 | Combination Pliers | Multi-Component Handle | Black Atramentized – 160mm
The Knipex 03 02 Series Combination Pliers are one of the top selling pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 72 01 160 | Diagonal Cutters for Plastics | Plastic Coated Handle | Black Atramentized – 160mm
72 01 160 Diagonal Cutters for plastics
The Knipex 72 01 160 is used in plastics production when, for example, plastic moulded parts need to be mechanically separated from sprue after demoulding.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
- Improved transmission ratio for 25 % more cutting performance
Technical Attributes :
- Head - polished
- Handles - plastic coated
- Weight - 164 g
- Dimensions - 160 x 50 x 15 mm
- REACH compliant - does not contain SVHC
- RoHS compliant - not applicable
Knipex 78 03 125 | Electronics Super Knips® | Multi-Component Handle | Polished Head / INOX Steel – 125mm
78 03 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. cutting edge hardness approx. 54 HRC. INOX tool steel.
- Cutting capacities medium hard wire (diameter): Ø 1.0 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 72 02 125 | Diagonal Cutting Plier For Plastic | Multi-Component Handle | Polished – 125mm
72 02 125Diagonal Cutters for plastics
The Knipex 72 02 125 are the smallest Knipex diagonal cutters for plastic. They are used when moulded parts need to be mechanically separated from sprue after demoulding. They are also suitable for delicate work, e.g. in model making. Their surface ground cutting faces produce a clean, flush separation of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component.
Key Features :
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 14 25 160 | Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated- 160mm
14 25 160
Diagonal Insulation Stripper
Key Features :
- With long cutter
- High cutting capacity due to high leverage joint
- Precision stripping holes for single conductors of 1.5 and 2.5 mm²
- Convenient cutting of NYM cables up to 5 x 2.5 mm²
- Long tips for ultra fine cutting work also in confined areas
- Induction-hardened precision blades, cutting edge hardness approx. 60 HRC
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Knipex 74 06 180 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.7 mm
- Cutting capacities piano wire (diameter) - Ø 2.2 mm
- VDE tested - yes
Knipex 70 02 180 | Diagonal Cutter | Multi-Component Handle | Black Atramentized – 180mm
The Knipex 70 02 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
Knipex 13 92 200 | Electrical Installation Pliers w/ Locking Lever | Multi-Component Handle | Black Atramentized – 200mm
13 92 200 Pliers for Electrical Installation
6 functions in one pair of pliers. multifunctional pliers for the electrical installation; to grip flat and round material, for bending, deburring, cutting cable, stripping and crimping wire ferrules. Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. Clear-cut outside edge on the gripping surfaces for working on flush-mounted junction boxes and deburring feed-through holes. Stripping holes for conductors of 0.75 - 1.5 mm² and 2.5 mm². Crimping die for wire ferrules 0.5 - 2.5 mm². Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5 mm² / Ø 15 mm. Slim dimensions for easy access. Bolted joint: precise, zero backlash operation of pliers. in case of models with opening spring integrated in the joint, the activated locking lever keeps the cutting edges closed while other functions remain active. the intelligent latching mechanism enables you to "grip" without opening the pliers. The cutting edge remains closed and protected.
Cutting capacity copper cable, multiple-stranded: Ø 15 mm
Cutting capacity copper cable, multiple-stranded: 50 mm²
Stripping capacity for cross-sections: 0.75-1.5 mm²?/ 2.5 mm²
Capacity in square millimetres: 0.5-2.5 mm²
AWG: 1 / 0
Technical attributes:
- Length:210 mm
- Width :63 mm
- Height:21 mm
- Weight:260 g
Knipex 16 30 135 SB | Spiral Cutting Stripping Tool | 6mm-29mm
16 30 135 SB Dismantling Tool
For stripping round cable sheaths made of PVC, rubber, silicone or PTFE. Self-tightening holding lever. With knurled nut for cutting depth adjustment. Changing from circular to longitudinal cutting by turning the tool body. Spiral cutting for removing intermediate pieces. Replaceable blade.
- Stripping capacities (diameter): Ø 6.0-29.0 mm
Technical attributes:
- Length: 180 mm
- Width : 85 mm
- Height: 36 mm
- Weight: 120 g
Knipex 12 80 100 SB | Mini Wire Stripper
12 80 100 Mini Wire Strippe
Precise stripping, stepwise adjustment to the conductor diameters. With wire cutter
Key Features:
- Precise stripping, stepwise adjustment to the conductor diameters
- With wire cutter
- Adjustable length stop from 4.0 - 15.0 mm
- With locking device
- For thin copper conductors Ø 0.3 to 1.0 mm
Technical attributes
- Length : 200 mm
- Width : 95 mm
- Height : 21 mm
- Weight : 202 g
Knipex 16 60 100 SB | Stripping Tool for Coax Cable Universal
6 60 100 SB
Stripping Tool for coax cable - Universal
- For stripping all common coax cables between Ø 4.8 - 7.5 mm (e.g. for TV- and satellite antenna), also suitable for PVC round cable 3 x 0.75 mm²
- With length scale 5.0 - 20.0 mm
- Double shell, folding back stripping tool
- With opening spring and locking device
Technical Attributes :
- RoHS compliant - not applicable
- Cable type - Coax cables 4.8 - 7.5 round cables 3 x 0.75 mm²
Knipex 97 40 10 | Punch Down Tool
Knipex 97 40 20 SB | Compression Tool for Coax Connector
97 40 20 SB Compression Tool
for crimping F, BNC and RCA connectors. robust design. Suitable for RG 59 / 6 / 11 cable. Rotatable head for different cable sizes. Rotatable insert for various types of connector. Adjusting screw for various connector lengths. Applicable among others for compression connectors Kathrein EMK 12; Cablecon F-56 CX3 5.1; Astro FKS 06. self-service card/blister.
Applications: for F. BNC and RCA connectors.
Technical attributes :
Length : 175 mm
Width : 57 mm
Height : 25 mm
Weight : 430 g
Knipex 97 52 30 | PreciForce® Crimping Pliers | Multi Component Grip
97 52 30 KNIPEX PreciForce® Crimping Pliers
- Consistently high crimping quality due to precision dies and ratchet mechanism (unlockable)
- Precise, factory calibrated crimping pressure
- High crimping force due to efficient lever action
- Good handling due to favourable handle position, low weight, short design and ergonomically shaped handles
- Crimping die is not exchangeable
Technical attributes:
- Application - non-insulated terminals in accordance with DIN 46235 and crimp connectors in accordance with DIN 46267
- Capacity in square millimetres - 1.5 — 10.0 mm²
- Number of crimp profiles - 5
- AWG - 16 — 8
Knipex 97 78 180 | VDE Crimping Pliers for Wire Ferrules | Multi-Component Handle | Polished Head – 180mm
97 78 180 Crimping Pliers for wire ferrules
light and slim design. also as VDE version. easy crimping due to optimised transmission ratio. For crimping wire ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm². Crimping in marked half-round dies for reliable connections between the sleeve and the conductor. 9 particularly deep dies with conical side faces.
- Applications: Wire ferrules
- Capacity in square millimetres: 0.25-16.0 mm²
- Number of crimping positions: 9
- AWG: 24-6
Technical attributes
Length : 185 mm
Width : 54 mm
Height : 28 mm
Weight : 254 g