Showing 22–42 of 94 results
Knipex 72 21 160 | Diagonal Cutter For Plastics | Cutting Edges 90° | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 72 21 160 Diagonal Cutter For Plastics
Due to their cutting faces at an angle of 90°, the Knipex 72 21 160 diagonal cutters are suitable for work perpendicular to the component. This approach is necessary when access from the side is not possible, as with angled plastic mould parts or machine components.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 73 06 160 | X-Cut® VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
73 06 160 KNIPEX X-Cut®
cuts finest strands as well as multi-core cables and piano wires. Powerful, light and universal. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Box-joint design: highest stability with low weight. Doubly supported joint axis for heavy duty. Large opening width for thicker cables. Cuts precisely, even through fine copper wires. Compact, low-weight construction. Universally usable, in the assembly, maintenance and production. 40% less force required compared with standard diagonal cutters of the same length.
- Cutting capacities soft wire (diameter): Ø 4.8 mm
- Cutting capacities medium hard wire (diameter): Ø 3.8 mm
- Cutting capacities hard wire (diameter): Ø 2.7 mm
- Cutting capacities piano wire (diameter): Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded: Ø 12.0 mm
- VDE tested: yes
Technical attributes:
Length : 165 mm
Width : 60 mm
Height : 28 mm
Weight : 175 g
Knipex 14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes:
- Length: 175 mm
- Width : 60 mm
- Height: 30 mm
- Weight: 216 g
14 26 160 | VDE Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated – 160mm
14 26 160 Diagonal Insulation Stripper
with long cutter. high cutting capacity due to high leverage joint. Precision stripping holes for single conductors of 1.5 and 2.5 mm². Convenient cutting of NYM cables up to 5 x 2.5 mm². Long tips for ultra fine cutting work also in confined areas. Induction-hardened precision blades, cutting edge hardness approx. 60 HRC.
- Cutting capacities soft wire (diameter): Ø 2.5 mm
- Cutting capacities medium hard wire (diameter): Ø 1.5 mm
- Stripping capacities in square millimetres: 1.5?/ 2.5 mm²
- AWG: 16?/ 14
- VDE tested: yes
Technical attributes
Length : 175 mm
Width : 60 mm
Height : 30 mm
Weight : 216 g
Knipex 97 40 10 | Punch Down Tool
Knipex 87 02 300 | Cobra® Water Pump Pliers | Multi-Component Handle | Grey Atramentized – 300mm
87 02 300 KNIPEX Cobra®
Push the button for adjustment on the workpiece. Fine adjustment for optimum adaptation to different sizes of workpieces and a comfortable handle width. Self-locking on pipes and nuts: no slipping on the workpiece and low handforce required. Gripping surfaces with special hardened teeth, teeth hardness approx. 61 HRC: high wear resistance and stable gripping. Box-joint design for high stability due to double guide. Reliable catching of the hinge bolt: no unintentional shifting. Pinch guard prevents operators' fingers being pinched.
- Adjustment positions: 30
- Capacities for nuts: Ø 2 3/4
- Capacities for nuts: 60 mm
- Capacities for pipes (diameter): Ø 70 mm
Knipex 12 80 100 SB | Mini Wire Stripper
12 80 100 Mini Wire Strippe
Precise stripping, stepwise adjustment to the conductor diameters. With wire cutter
Key Features:
- Precise stripping, stepwise adjustment to the conductor diameters
- With wire cutter
- Adjustable length stop from 4.0 - 15.0 mm
- With locking device
- For thin copper conductors Ø 0.3 to 1.0 mm
Technical attributes
- Length : 200 mm
- Width : 95 mm
- Height : 21 mm
- Weight : 202 g
Knipex 97 78 180 | VDE Crimping Pliers for Wire Ferrules | Multi-Component Handle | Polished Head – 180mm
97 78 180 Crimping Pliers for wire ferrules
light and slim design. also as VDE version. easy crimping due to optimised transmission ratio. For crimping wire ferrules according to DIN 46228 parts 1 + 4 from 0.25 to 16 mm². Crimping in marked half-round dies for reliable connections between the sleeve and the conductor. 9 particularly deep dies with conical side faces.
- Applications: Wire ferrules
- Capacity in square millimetres: 0.25-16.0 mm²
- Number of crimping positions: 9
- AWG: 24-6
Technical attributes
Length : 185 mm
Width : 54 mm
Height : 28 mm
Weight : 254 g
Knipex 13 42 165 | Cutting, Stripping & Dismantling Pliers | Multi-Component Handle | Black Atramentized – 165mm
13 42 165 Stripping Pliers
Multifunctional - cutting and stripping with one pair of pliers. for time-saving stripping of all round sheathed and damp-proof installation cables (e.g. NYM cable). simplified access especially into deep mounted junction boxes thanks to slim head design and optimally angled cable sheath cutter. strip cables easily and without damage thanks to circular cutting edge with depth limiter. Suitable for universal use: precision wire stripping holes for conductors from 1.5 and 2.5 mm². With side cutters for cutting and trimming conductors, wires, small screws and nails. All cutters additionally induction-hardened to approx. 61 HRC for high wear resistance. 30 % lighter than comparable pliers.
- Cutting capacities medium hard wire (diameter): Ø 3.2 mm
- Cutting capacities hard wire (diameter): Ø 2.2 mm
- Cable stripping values (diameter): 8-13 mm
- Stripping capacities in square millimetres: 0.75-1.5 mm²?/ 2.5 mm²
Knipex 74 06 180 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.8 mm
- Cutting capacities hard wire (diameter) - Ø 2.7 mm
- Cutting capacities piano wire (diameter) - Ø 2.2 mm
- VDE tested - yes
Knipex 87 05 250 | Cobra® Water Pump Pliers | Multi-Component Handle | Chrome – 250mm
The product which needs no introduction, the Knipex 87 05 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
- Technical attributes
Adjustments - 25
Capacity For Nuts - 46mm
Capacity For Pipes - 50mm Diameter
Knipex 14 25 160 | Diagonal Insulation Stripper | Multi-Component Handle | Chrome Plated- 160mm
14 25 160
Diagonal Insulation Stripper
Key Features :
- With long cutter
- High cutting capacity due to high leverage joint
- Precision stripping holes for single conductors of 1.5 and 2.5 mm²
- Convenient cutting of NYM cables up to 5 x 2.5 mm²
- Long tips for ultra fine cutting work also in confined areas
- Induction-hardened precision blades, cutting edge hardness approx. 60 HRC
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Knipex 87 01 300 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 300mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions : 30
- Capacities for pipes (diameter) - Ø 2 3/4 Inch
- Capacities for nuts - 60 mm
- Capacities for pipes (diameter) - Ø 70 mm
Knipex 72 11 160 | Diagonal Cutters For Plastics Cutting Edges 45° | Plastic Coated Handle | Black Atramentized – 160mm
72 11 160 Diagonal Cutters for plastics
The Knipex 72 11 160 is used in plastics production when, for example, plastic moulded parts need to be mechanically separated from sprue after demoulding. The surface ground cutting faces are at an angle of 45°.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 31 25 160 – Needle Nose Pliers Flat | | Multi-Component Handle | Black Atramentized – 160mm
31 25 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes :
- Jaw thickness (joint) (T1) - 7.5 mm
- Tips width (W4) - 1.8 mm
- Tips thickness (T2) - 2.5 mm
- Gripping surface length (L4) - 27.0 mm
- Jaw length (L3) - 55.0 mm
- Head width (W3) - 16.0 mm
Knipex 77 02 115 | Electronics Diagonal Cutter With Box Joint | Multi-Component Handle | Mirror Polished – 115mm
77 02 115 Electronics Diagonal Cutter
With box joint
- Durable, load-optimised design with backlash-free box joint
- High, slim sleeves for fine and comfortable gripping between thumb and index finger
- Less physical effort due to very high transmission ratio
- Load-optimised for a more direct feel when working
- Low-friction double spring for smooth and even opening
- The mirror polish in combination with a fine oil film provides rust protection - no circuit faults caused by peeling chrome from plated tools
- Cutters additionally laser hardened, cutter hardness at least 62 HRC
- Round head, with small bevel
Technical attributes :
- Cutting capacities medium hard wire (diameter) - Ø 1.2 mm
- Cutting capacities hard wire (diameter) - Ø 0.6 mm
- Cutting capacities soft wire (diameter) - Ø 01 mm
- Jaw length (B) - 14 mm
- Jaw thickness (joint) (D) - 7.5 mm
- Head width (A) - 11 mm
Knipex 73 02 160 | X-Cut® High-Leverage Diagonal Cutter | Multi-Component Handle | Black Atramentized – 160mm
73 02 160 KNIPEX X-Cut®
cuts finest strands as well as multi-core cables and piano wires. Powerful, light and universal. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Box-joint design: highest stability with low weight. Doubly supported joint axis for heavy duty. Large opening width for thicker cables. Cuts precisely, even through fine copper wires. Compact, low-weight construction. Universally usable, in the assembly, maintenance and production. 40% less force required compared with standard diagonal cutters of the same length.
- Cutting capacities soft wire (diameter): Ø 4.8 mm
- Cutting capacities medium hard wire (diameter): Ø 3.8 mm
- Cutting capacities hard wire (diameter): Ø 2.7 mm
- Cutting capacities piano wire (diameter): Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded: Ø 12.0 mm
Technical attributes
Length : 165 mm
Width : 60 mm
Height : 21 mm
Weight : 175 g
Knipex 13 02 160 | Long Nose Electrical Pliers ( Cutter & Crimper ) – 160mm
Electricians' Pliers
Key Features:
- The ideal pliers for cable work
- Geeignet zum Schneiden, Biegen, Greifen, Crimpen und Abisolieren
- For gripping and bending wire
- For cutting medium hard and hard wire
- Precision cutting edges additionally induction-hardened, cutting edge hardness approx. 60 HRC
- With precision stripping holes
- For crimping wire ferrules
- With comfort handles: consisting of three ergonomic components for optimized handling and equipped with two KNIPEXtend interfaces for extensions
Technical attributes:
- Stripping capacities in square millimetres -0.5 — 0.75 / 1.5 / 2.5 mm²
Knipex 74 06 160 | VDE High-Leverage Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 74 06 Series High Leverage Diagonal Cutting Pliers are built to last, and are only for the toughest of applications!
Key Features:
- High performance cutting with minimal effort.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft, hard and piano wire.
- Cutting edges are additionally hardened, to a hardness of 64HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.4 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
- Cutting capacities piano wire (diameter) - Ø 2.0 mm
- VDE tested - yes