Showing 64–84 of 94 results
Knipex 31 11 160 | Flat Needle- Nose Pliers – 160mm
31 11 160 Flat Nose Pliers (Needle-Nose Pliers)
- Precision pliers for very exact assembly, bending and adjusting work
- Slim and ergonomically shaped for work in poorly accessible areas
- Smooth ground gripping surfaces
- Edges carefully deburred
Technical Attributes:
Jaw thickness (joint) (T1) - 7.5 mm
Tips width (W4) - 1.8 mm
Tips thickness (T2) - 2.5 mm
Jaw length (L3) - 55.0 mm
Head width (W3) - 16.0 mm
Knipex 38 21 200 | Bent Mechanics Needle Nose Pliers | Coated Handle | Black Atramentized – 200mm
38 21 200 Mechanics' Pliers
High bending strength of the pliers tips. 40° bent, half-round jaws.
- Jaw thickness (joint) (T1): 9.5 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 73.0 mm
- Head width (W3): 17.5 mm
- Head angle: 40
Technical attributes :
Length : 200 mm
Width : 47 mm
Height : 13 mm
Weight : 175 g
Knipex 08 05 110 | Mini Combination Pliers | Multi-Component Handle | Chrome Plated – 110mm
Knipex 08 05 Series Mini Combination Pliers
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Specification:
- Cutting Capacity (Medium/Hard Wire): 2.5mm Ø Dia
- Cutting Capacity (Hard Wire): 1.6mm Ø Dia
- Cutting Capacity (Multi-Strand Copper Cable): 9mm Ø Dia or 10.0mm²
Knipex 72 02 125 | Diagonal Cutting Plier For Plastic | Multi-Component Handle | Polished – 125mm
72 02 125Diagonal Cutters for plastics
The Knipex 72 02 125 are the smallest Knipex diagonal cutters for plastic. They are used when moulded parts need to be mechanically separated from sprue after demoulding. They are also suitable for delicate work, e.g. in model making. Their surface ground cutting faces produce a clean, flush separation of extruded plastic injection moulds and sprues or sprue residues. The sprue is cut off directly on the moulded part, because the cutting edge runs parallel to the component.
Key Features :
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
Knipex 03 06 180 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 180mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.4 mm
- Cutting capacities hard wire (diameter) - Ø 2.2 mm
- Cutting capacity copper cable, multiple-stranded - Ø 12.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 70 02 180 | Diagonal Cutter | Multi-Component Handle | Black Atramentized – 180mm
The Knipex 70 02 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.5 mm
Knipex 70 05 160 | Diagonal Cutter | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 70 05 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attributes:
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
Knipex 87 01 150 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 150mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 16
- Capacities for pipes (diameter) - Ø 1 3/8 Inch
- Capacities for nuts - 32 mm
- Capacities for pipes (diameter) - Ø 36 mm
Knipex 29 11 160 | Telephone Pliers | Plastic Coated Handle | Black Atramentized – 160mm
Knipex 08 22 145 | Needle-Nose Combination Pliers | Multi-Component Handle | Black Atramentized – 145mm
The Knipex 08 22 Series Needle-Nose Combination Pliers are small, but high-leverage pliers with a pointed jaw, designed for all common installation and repair work.
Key Features:
- Handy for confined areas due to slim head design and pointed jaws.
- Groove in gripping area for pulling small nails, pins and bolts.
- Cutting edges for soft and hard wire.
- Cutting edges are additionally hardened, to a hardness of 61HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Knipex 03 06 160 | VDE Combination Pliers | Multi-Component Handle | Chrome Plated – 160mm
The Knipex 03 06 Series VDE Combination Pliers are one of the top selling electrical pliers across our range, here are a few reasons why!
Key Features:
- Gripping zones for flat and round material, suitable for versatile use.
- Cutting edges for soft and hard wire.
- Long cutting edges for thicker cables.
- Cutting edges are additionally hardened, to a hardness of 60HRC.
- Special tool steel, forged, and multi-stage oil hardened.
Product Specification:
- Pliers: Chrome Plated
- Head: Chrome Plated
- Handles: Multi-Component
Technical Attribute :
- Cutting capacities medium hard wire (diameter) - Ø 3.1 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
- Cutting capacity copper cable, multiple-stranded - Ø 10.0 mm
- Cutting capacity copper cable, multiple-stranded - 16.0 mm²
Knipex 72 01 160 | Diagonal Cutters for Plastics | Plastic Coated Handle | Black Atramentized – 160mm
72 01 160 Diagonal Cutters for plastics
The Knipex 72 01 160 is used in plastics production when, for example, plastic moulded parts need to be mechanically separated from sprue after demoulding.
- Cutting face flush
- For nearly flush cutting of moulded plastic components from sprues
- Cuts soft materials such as lead in a flush cut
- With opening spring
- Improved transmission ratio for 25 % more cutting performance
Technical Attributes :
- Head - polished
- Handles - plastic coated
- Weight - 164 g
- Dimensions - 160 x 50 x 15 mm
- REACH compliant - does not contain SVHC
- RoHS compliant - not applicable
Knipex 78 03 125 | Electronics Super Knips® | Multi-Component Handle | Polished Head / INOX Steel – 125mm
78 03 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. cutting edge hardness approx. 54 HRC. INOX tool steel.
- Cutting capacities medium hard wire (diameter): Ø 1.0 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm
Knipex 87 01 125 | Cobra® Water Pump Pliers | Non-Slip Handle | Grey Atramentized – 125mm
The product which needs no introduction, the Knipex 87 01 Series Cobra® Water Pump Pliers have been around since 1984, and it features a patented design.
Key Features:
- Push button for adjustment of different sizes.
- Self locking mechanism.
- Gripping teeth hardened to approximately 61HRC using high frequency for a secure grip and a long service life (60HRC for MiniXS).
- High level of user comfort due to constant hand-friendly gripping position resulting from fine adjustment.
- Grips flat, round and angled components.
- Sits firmly in the hand thanks to non-slip handles.
Product Specification:
Pliers: Grey Atramentized
Head: Polished
Handles: Non-Slip Coated
Technical attributes :
- Adjustment positions - 13
- Capacities for pipes (diameter) - Ø 1 Inch
- Capacities for nuts - 27 mm
- Capacities for pipes (diameter) - Ø 30 mm
Knipex 25 06 160 | VDE Snipe Nose Side-Cutting (Radio) Pliers | Multi-Component Handle | Chrome Plated – 160mm
25 06 160 Snipe Nose Side Cutting Pliers
Suitable for finer gripping and cutting work. Half-round, long, tapered jaws. Knurled gripping surfaces. With cutting edges for soft, medium-hard and hard wire. Cutting edges additionally induction-hardened, cutting edge hardness approx. 61 HRC.
- Cutting capacities medium hard wire (diameter): Ø 2.5 mm
- Cutting capacities hard wire (diameter): Ø 1.6 mm
- Jaw thickness (joint) (T1): 9.0 mm
- Tips width (W4): 3.0 mm
- Tips thickness (T2): 2.5 mm
- Jaw length (L3): 50.0 mm
- Head width (W3): 16.5 mm
Technical attributes
Length : 170 mm
Width : 53 mm
Height : 17 mm
Weight : 146 g
Knipex 32 11 135 | Relay Adjusting Pliers | Coated Handle – 135mm
32 11 135 Relay Adjusting Pliers
- For gripping components and wires of the smallest diameters and for bending contact and relay springs
- Polished gripping surfaces
- Edges carefully deburred
Technical attributes :
- Jaw thickness (joint) (D) - 7.0 mm
- Tips width (E) - 1.0 mm
- Tips thickness (F) - 2.0 mm
- Jaw length (B) - 34.0 mm
- Head width (A) - 12.5 mm
Knipex 41 14 250 | Lock Grip Plier Hold Round | Flat and Semi-Circular Gripping Mouth – 250mm
41 14 250 Grip Pliers
- Hold round, profile and flat material securely
- Heavy duty model
- With adjustment screw and release lever
- One-hand operation
- High clamping pressure due to toggle lever action
Technical attributes :
- Clamping width round - 36 mm
- Clamping width square - 36 mm
- Clamping width hexagon - 36 mm
Knipex 41 04 250 | Locking Grip Pliers | Semi-Circular Gripping Mouth – 250mm
41 04 250 Grip Pliers
Hold round, profile and flat material securely. Heavy duty model. With adjustment screw and release lever. One-hand operation. High clamping pressure due to toggle lever action.
- Clamping width round: 40 mm
- Clamping width square: 20 mm
- Clamping width hexagon: 30 mm
Technical attributes
Length : 230 mm
Width : 65 mm
Height : 17 mm
Weight : 517 g
Knipex 41 24 225 | Lock Grip Plier | Flat Gripping Mouth – 225mm
41 24 225 Grip Pliers
- Hold round, profile and flat material securely
- Heavy duty model
- With adjustment screw and release lever
- One-hand operation
- High clamping pressure due to toggle lever action
Technical attributes :
- Clamping width round - 25 mm
- Clamping width square - 16 mm
- Clamping width hexagon - 30 mm
Knipex 70 02 160 | Diagonal Cutter | Multi-Component Handle | Black Atramentized – 160mm
The Knipex 70 02 Series Diagonal Cutting Pliers are one of the top selling cutters across our range, here are a few reasons why!
Key Features:
- Designed for all-round use.
- High quality material and precise workmanship for long service life.
- Narrow head style for use in confined areas.
- Precision cutting edges for soft and hard wire.
- Clean cutting of thin copper wire.
- Cutting edges are additionally hardened, to a hardness of 62HRC.
Product Specification:
- Pliers: Black Atramentized
- Head: Polished
- Handles: Multi-Component
Technical Attributes :
- Cutting capacities medium hard wire (diameter) - Ø 3.0 mm
- Cutting capacities hard wire (diameter) - Ø 2.0 mm
Knipex 78 61 125 | Electronics Super Knips® | Multi-Component Handle | Burnished Head / Tool Steel – 125mm
78 61 125 Electronic Super Knips®
Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics. Ground, very sharp cutting edges without bevel. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life. Joint with stainless steel rivet. Extremely smooth movement for minimum operator fatigue. With opening spring and opening limiter. also suitable for cutting glass fibre cables (fibre optics). cutting edges additionally induction-hardened, cutting edge hardness approx. 64 HRC. Special tool steel, oil hardened in multiple stages.
- Cutting capacities medium hard wire (diameter): Ø 1.2 mm
- Cutting capacities soft wire (diameter): Ø 0.2-1.6 mm
- Jaw length (B): 9 mm
- Jaw thickness (joint) (D): 7.5 mm
- Head width (A): 13.5 mm